Modern Maid Range Parts — Browse All Models

Troubleshooting common Modern Maid range problems

Modern Maid ranges were built to last, but age, heat, and regular use can cause components to wear out. Identifying the problem before you order parts saves time and ensures you fix the right issue.

Oven not heating properly

If your gas oven won’t heat, first inspect the igniter, which may be cracked.. Electric models often fail due to a burned-out element. Replace the faulty part to restore even heating.

Surface burner not lighting

When a gas burner won’t spark or ignite, check the burner cap alignment and clean the ports with a soft brush. If the burner still won’t light, the igniter electrode or spark module may be faulty.

Oven door won’t close fully

A door that won’t seal tightly lets heat escape and affects cooking results. Worn or bent hinges are often to blame. You can replace the oven door hinges to restore a proper fit and heat retention.

Commonly replaced Modern Maid range parts

• Bake element: This element supplies heat during baking. If the oven stays cold or only partially heats, the element could be burned out. Installing a new bake element restores consistent baking temperature.

• Oven igniter: The igniter lights the gas for oven heating. If it glows weakly or fails to ignite the burner, it’s likely worn. Learn how to replace a gas range oven igniter to get your oven lighting properly again.

• Surface element switch: This control regulates power to electric burners. When a burner won’t respond or runs at one temperature, changing the surface element control switch restores control.

• Oven door hinge: The hinge supports and aligns the oven door. If the door sags or won’t close completely, install new oven door hinges for a tight, secure seal.

• Spark module: This component sends voltage to the igniters. If multiple burners fail to spark, swapping in a new spark module restores ignition.

Benefits of using OEM Modern Maid range parts

OEM Modern Maid range parts from Sears PartsDirect are designed to fit your exact model for reliable results. Using genuine components helps maintain your range’s safety, heating accuracy, and durability. You’ll find illustrated diagrams and helpful repair resources to guide you through identifying and installing the right parts.

Modern Maid range FAQs

Are Modern Maid range parts still available?

Yes. While the brand is no longer in production, Sears PartsDirect continues to stock many OEM and substitution parts for gas and electric Modern Maid ranges.

Who made Modern Maid ranges?

Modern Maid was originally produced by the Magic Chef Company, later acquired by Maytag and Whirlpool. Some compatible replacement parts overlap with those brands.

Why does my Modern Maid oven take longer to heat?

Weak heating usually indicates a worn bake element or faulty temperature sensor. Testing each component will show which one needs replacement.

Can I still get burner knobs or drip pans for my Modern Maid range?

Yes. Many knobs, pans, and trim pieces are still available as OEM or equivalent parts for older models.

Where can I find my Modern Maid model number?

Look along the oven door frame, under the cooktop, or inside the storage drawer area. The model number label identifies your exact configuration for ordering parts.