Yard-Man Front-engine lawn tractor Parts — Browse All Models

Troubleshooting your Yard Man front-engine lawn tractor when it won't cut grass

If the riding lawn mower runs but the blades won't cut the grass, the problem could be with the blade belt. Examine and replace the belt if you find it worn or broken. If the belt is okay, check the blade belt idler pulley, blade clutch cable and clutch lever assembly on tractors with manual blade actuators. On riding mowers that use a PTO switch to activate the blades, check the PTO switch and the electric clutch. Failed mandrel pulleys can also prevent the blades from spinning properly.

You'll need to replace the mandrel pulleys if they're worn or damaged

Common replacement parts for Yard Man front-engine lawn tractors

• Brake interlock switch. The brake interlock switch detects whether you have the brake pedal fully pushed down. The parking brake holds the brake pedal in the fully depressed position so the brake interlock switch also recognizes whether you have the parking brake set. The brake interlock switch won't allow you to start the tractor without the parking brake set or the brake pedal fully depressed.
• Blade clutch cable. The blade clutch cable connects the blade clutch lever to the blade belt idler arm on the mower deck. When you shift the clutch lever to engage the cutting blades, the cable pulls the idler arm, which then tightens the blade belt and spins the cutting blades. The blade clutch cable releases blade belt tension so the blades don't spin when you shift the blade clutch lever to disengage the cutting blades.
• Carburetor rebuild kit. The carburetor rebuild kit includes gaskets, seals, a hinge pin and other components to refurbish the carburetor.
• Fuel filter. A fuel filter is a filter in the fuel line that screens out dirt and rust particles from the fuel. The fuel filter paper is usually integrated into a cartridge. Fuel filters used with in most internal combustion engines.