Crosley Gas range Parts — Browse All Models

Installing a new electronic oven control board in your Crosley gas range

• Pull the range out of the cabinet and unplug the power cord. Use a helper if necessary. Shut off the gas supply.
• Remove the screws from the control panel back shield and pull it off the range.
• Disconnect all the wires from the oven control board. Remove the mounting screws and pull the oven control board out of the control panel.
• Position the electronic oven control board and reinstall the mounting screws. Carefully connect all the wires to the new oven control board.
• Place the control panel back shield on the back of the control console and secure the back shield with the mounting screws.
• Plug the power cord into the electrical outlet. Open the gas supply shut-off valve. Carefully slide the range back into the cabinet, ensuring that the rear leveling foot properly engages with the anti-tip bracket so the range doesn’t fall forward when you open the oven door and pull out a loaded oven rack. Use a helper if necessary.

Top-selling Crosley gas range replacement parts

• Oven door light switch. The oven door light switch is a plunger switch on the frame of the oven above the opening to the oven. The oven door pushes the oven light switch plunger in when the door is closed to turn the light off. When the door is open, the plunger is released and the light is on.
• Outer oven door glass panel. The outer oven door glass panel is the heat-resistant piece of glass that forms the outer part of the oven door.
• Oven door hinge. The hinges on an oven door control the rate at which the door opens and also allow the door to stay open at an angle. Hinges are usually installed in pairs so the hinges and tension springs match, ensuring the smooth operation of the door.
• Oven door lock assembly. The oven door lock assembly is a safety mechanism that prevents accidental burns and oven fires by latching the door shut during self-cleaning. The door unlocks when the oven cools to a safe temperature (usually less than 200 degrees F). It's also used on ovens with the child lock-out feature. The assembly includes the lock and switches that detect whether the door is locked.
• Spark igniter electrode. The spark igniter electrode provides an ignition spark to light a surface gas burner. It's an insulated electrode that sends a spark to the burner head when the spark module provides voltage. It sparks with a ticking sound when you turn the burner switch on a control knob to the Lite position.