Official Magic Chef upright freezer parts

How to deal with a noisy Magic Chef upright freezer

Excessive frost on the evaporator can interfere with the rotating evaporator fan blade, causing a loud buzzing noise inside the freezer compartment. If you hear buzzing and the noise gets louder when you open the freezer door (indicating the noise is coming from inside the cabinet), check for excessive frost inside the freezer. If you find excessive frost inside the freezer, find and repair the cause to eliminate the buzzing noise.

A leaky door gasket can cause excessive frost to build up inside the cabinet and on the evaporator. Replace the door gasket if damaged. Manually defrost the freezer by safely storing food and unplugging the refrigerator. Prop the freezer door open and allow room-temperature air to circulate through the freezer cabinet to defrost the evaporator. After 24 hours, close the freezer door and plug the freezer back in to restore cooling. If the noise resumes, then you may need to replace the evaporator fan because its blade is damaged.

What to do when the high-temperature alarm sounds on your Magic Chef upright freezer

The high-temperature alarm sounds when the temperature inside the freezer rises 15 degrees above the set temperature so that you can fix the cooling problem and prevent food spoilage. (The exact temperature rise that triggers the alarm varies by model.)

When you hear the alarm, check the freezer electrical outlet for power because the control uses a battery as back-up power to sound the alarm (on most models) when the outlet power fails. Restore power to the freezer by resetting the house circuit breaker for the electrical outlet and the freezer will resume cooling if a power failure caused the alarm.

If the alarm goes off and you hear the compressor running, a sealed system problem such as a refrigerant leak or a failed compressor pump may be causing the problem. Have a service technician examine the freezer if you suspect a sealed system failure. A service technician will need to diagnose and fix a sealed system failure because the repair involves the recovery and recharge of the refrigerant.