Eureka Canister vacuum Parts — Browse All Models

Common replacement parts for Eureka canister vacuums

• Motor air filter. The motor air filter is a sponge that removes dirt and dust from the circulation cooling air that moves from the dirt collection chamber to the suction motor compartment. Because this type of filter usually can't be cleaned, it must be replaced when it's dirty.
• Exhaust filter. The exhaust filter traps particles exhaust air from the dirt collection chamber.
• Brush roll. The brush roll is a cylinder covered with rows of bristles. As the brush roll spins, the bristles lift dirt from the carpet fibers.
• Wand. The wand is a stiff suction tube that attaches to the cleaning head at one end and the vacuum hose at the other end. The wand transfers dirt from the cleaning head to the vacuum hose. The wand has a handle at the end that enables the user to maneuver the cleaning head.

Replacing the dust bag in your Eureka canister vacuum cleaner

• Unplug the vacuum cleaner power cord from the electrical outlet.
• Remove the suction hose from the canister.
• Pull the canister hood release up and out. Lift the canister hood.
• Disengage the cardboard tab from the bag mount by pulling the tab out while lifting up on the tab.
• Pull the bag out of the canister.
• Install the new bag's cardboard tab into the bag mount and tuck the new dust bag into the canister.
• Close the canister hood and reinstall the suction hose on the canister.