Brinley power sander repair and replacement parts

How to install a sanding disc on your Brinley power sander

• Be sure that the power sander is unplugged and that it's cool to the touch.
• Push the hub of the disc nut through the center of the sanding disc.
• Position the backing disc behind the sanding disc and push the disc nut through the backing disc.
• Push the assembled discs on the spindle and thread the disc nut onto the disc nut hub.
• Tighten the disc nut completely down on the spindle.
• Engage the locking pin to lock the spindle in place.

Use and care tips for your Brinley power sander

• Blow dust and grit out of the motor housing using compressed air after every use.
• Wipe the power sander down using a soft cloth.
• Don't use solvents or harsh chemicals to clean non-metallic power sander parts.
• Inspect the power sander before each use for loose or damaged parts. Tighten any loose parts and replace any damaged parts before use.
• Lubricate the power sander as directed in your owner's manual.