Thermador Garbage disposal Parts — Browse All Models

How to fix a Thermador garbage disposal leak

Unplug the garbage disposal and make sure the sink flange is properly seated and sealed. Check the sink flange support ring and tighten the ring if it's loose. If the support ring is tight, check the sink flange gasket for damage and replace the gasket if it's torn or cracked.

If the garbage disposal leaks water from the discharge elbow connection, tighten the discharge elbow mounting screws. If the mounting screws are tight, check the discharge elbow rubber gasket and replace the gasket if it's damaged.

How to release a jam in your Thermador garbage disposal

• Turn off the garbage disposal and the water.
• Insert one end of the self-service wrenchette into the center hole at the bottom of the garbage disposal.
• Work the wrenchette back and forth until it turns freely for full revolutions in both directions.
• Remove the wrenchette.
• Reach into the garbage disposal with tongs and remove the object that was jamming the garbage disposal.
• If necessary, press the reset button on the bottom of the garbage disposal to restore power going to the drive motor.