Skil Router Parts — Browse All Models

Troubleshooting your Skil router when the bit binds, stalls the motor or kicks back

• Check bit installation. Make sure that the bit is properly installed in the collet.
• Check for bit damage. Examine the bit and replace it if the bit is dull or damaged.
• The bit will bind up if the cut is too deep for one pass. If you're attempting a deep cut and the bit binds up, make the cut in two or more passes instead of just one pass.
• Check the speed. Adjust the speed if it's too slow for the cut that you're attempting.
• Adjust feed rate. Feed the work piece too fast can cause binding. Slow down the feed rate if necessary.

Top-selling Skil router parts

• Power board. The router power board controls the electrical power to the motor brushes.
• Motor housing baseplate. The motor housing baseplate protects the router motor and provides a smooth surface for a straight and even cut.
• LED light assembly. The LED light assembly illuminates the work area of the router.
• Dovetail template. The dovetail template provides an accurate pattern to follow when routing joints on the work piece.