Hoover Upright vacuum Parts — Browse All Models

Common replacement parts for Hoover upright vacuum cleaners

• Brush roll. The brush roll rotates to loosen dirt and debris so it's drawn into the vacuum.
• Brush motor overload. The brush motor overload shuts off the brush roller motor if the motor overheats.
• Brush roll drive belt. The brush roll drive belt connects the brush motor to the brush roller to rotate the brush roller during vacuuming.
• Vacuum motor. The vacuum motor spins the vacuum fan blades to create the suction to remove dust and dirt from the carpet.

Replacing the brush roll drive belt in your Hoover upright vacuum

• Unplug the power cord to disconnect electrical power from the vacuum cleaner.
• Turn the vacuum cleaner over so the bottom of the nozzle assembly is facing up.
• Remove the screws from the bottom of the bottom plate.
• Pull the bottom plate off the nozzle assembly.
• Pull out the brush roll and remove the belt from the motor shaft and brush roll.
• Slide the new belt onto the motor shaft and slip the other end of the belt over the brush roll.
• Reinstall the brush roll into the nozzle assembly.
• Reinstall the bottom plate and secure it with the mounting screws.