Official GE wine & beverage cooler parts

Top replacement parts for GE wine and beverage coolers

• Leveling leg. The leveling leg adjusts to keep the wine or beverage cooler cabinet level when you install the cooler in its permanent location.
• Light switch. The light switch turns the interior light on and off when you open and close the cooler door.
• Temperature sensor. The temperature sensor detects temperature inside the wine or beverage cooler cabinet and sends a signal to the electronic control board to indicate interior temperature.
• User interface control. The user interface control allows you to select wine or beverage cooler settings.
• Compressor. The compressor is a positive displacement pump rotated by an electric motor. The compressor receives low-pressure refrigerant gas from the evaporator and rotates to compress that refrigerant to a high-pressure gas that moves through the condenser. The refrigerant gets hot when compressed by the compressor pump. The condenser is a heat exchanger that removes heat from the refrigerant gas and condenses it into a high-pressure liquid refrigerant. The high-pressure liquid refrigerant flows through the expansion device and into the evaporator that's at low pressure. The high-pressure refrigerant expands and evaporates. It absorbs the latent heat of vaporization as it changes from a liquid to a gas, which causes the cooling action in the evaporator. The refrigerant flows through the evaporator and back to the compressor where the cycles starts over.

Maintenance tips for your GE wine and beverage coolers

• Clean the door gasket thoroughly every 3 months to maintain an air-tight seal. Clean the gasket with a soft cloth moistened with soapy water. Wipe the soapy water solution off with a cloth moistened with plain water. Wipe the door gasket dry. Apply a light coat of petroleum jelly on the hinge side of the door gasket to keep that portion of the gasket pliable and ensure a good seal.
• Keep air vents and grills clean and clear of dust and pet dander. Vacuum the air vents regularly to keep the slots clear and ensure proper air circulation.
• Wipe down the interior of the wine or beverage cooler regularly to keep the interior smelling fresh.
• Clean the door periodically and wipe down the cabinet as needed to maintain the wine or beverage cooler's appearance.