Emerson Speaker Parts — Browse All Models

Cleaning the speaker wire terminals on Emerson speakers

• Turn off the amplifier or receiver that you have the speakers connected to.
• Disconnect all speaker wires from the backs of the speakers.
• Use a vacuum cleaner hose with a narrow hose attachment to vacuum dust and debris from all speaker wire terminals.
• Use a cotton swab moistened with isopropyl alcohol to thoroughly clean deposits from all speaker wire terminals.
• Allow the terminals to dry completely then reconnect all speaker wires.

Types of loudspeaker drivers used in Emerson speaker systems

• Sub-woofer. The sub-woofer reproduces sound in the lowest frequency ranges typically from 20Hz – 200Hz.
• Woofer. The woofer reproduces sound from low ranges around 50Hz – 1kHz.
• Midrange driver. The midrange driver reproduces sound in the middle range of the audible sound spectrum from around 300Hz to about 5kHz.
• Tweeters. Tweeters reproduce the clear, crisp high frequency sounds above 2kHz up to around 20kHz.