Craftsman Painting power tool Parts — Browse All Models

Maintenance steps to follow for your Craftsman painting power tool

1. Follow the proper shut-down procedure when you complete the painting project.
2. Don't use oil-based solvents to clean the painting power tool after using it to apply latex paint. Use only warm, soapy water to clean the equipment after applying latex paint.
3. Wipe inside of the suction filter housing with a rag. Clean the suction filter in a separate container of cleaning fluid or water and then reinsert the filter into the suction filter Housing.
4. Spray 1 gallon of cleaning fluid or water through the spray gun.
5. Remove the spray tip and clean the tip with a brush.
6. Clean and dry the body of the painting power tool.

How to replace the spray tip on your Craftsman spray gun

1. Turn off the motor and trigger the spray gun to relieve pressure in the spray gun.
2. Unplug the power cord or remove the battery pack from the painting power tool.
3. Lock the spray gun trigger.
4. Use a wrench to remove the spray tip and tip guard from the spray gun. Properly clean the removed spray tip for reuse.
5. Thread the new spray tip and tip guard onto the spray gun.
6. Tighten the spray tip and tip guard firmly with the wrench.

Sears PartsDirect has the Craftsman spray gun parts you need to keep your painting power tools in top shape

Find the Craftsman spray gun parts you need to repair any painting power tool failure. Use our detailed parts drawings to quickly find the repair part you need to fix any spray gun problem.