$202.29 |Â
5% OFFÂ Phone Price : $212.29
CONFIRM THE PART FITS
Part Information
Helpful DIY instructions: Installation guide with video.
Push-to-start switch WP3404233 is an original equipment manufacturer (OEM) part that fits some Kenmore, Whirlpool, Maytag, Amana, Estate and Inglis dryers, as well as some dryers in Kenmore, Whirlpool and Crosley laundry centers.
Push-to-start switch WP3404233 starts the dryer when you press and release the button.
Replaces original dryer and laundry center dryer push-to-start switch part number 3404233.
Fits some dryers in the following series: Kenmore 110; Whirlpool LEB, LEG, LEN, LEQ, LER, LGB, LGN, LGQ, LGR, YLEN AND YLER; Maytag 4GMEDC, 4KMEDC, MEDC, MGDC and YMEDC; Amana 4KMEDC; Estate TEDS740 and TGDS740; and Inglis IP72000, IP82000 and IP84000.
Also fits some laundry centers in these series: Kenmore 110; Whirlpool 7MLTG, 7MWET, 7MWGT, LTE, LTG, WET, WGT, YLTE and YWET; and Crosley BYCWD6274.
Frequently Used Together
- $26.71 |Â30% OFFÂ MSRP : $38.00
- $92.56 |Â5% OFFÂ Phone Price : $97.56
- $143.88 |Â24% OFFÂ MSRP : $190.00
- $37.08 |Â21% OFFÂ MSRP : $47.00
- $12.33 |Â17% OFFÂ MSRP : $14.94
- $13.90 |Â50% OFFÂ MSRP : $28.00
- $31.16 |Â14% OFFÂ Phone Price : $36.16
- $6.49 |Â59% OFFÂ MSRP : $16.00
- $61.19 |Â14% OFFÂ Was : $71.19
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #4GMEDC100YQ0 Maytag dryer | 4GMEDC100YQ0 | Top and console parts |
| Model #MEDC200XW0 Maytag dryer | MEDC200XW0 | Top and console parts |
| Model #YWET4027EW1 Whirlpool laundry center | YWET4027EW1 | Washer/dryer control panel parts |
| Model #WGT3300XQ3 Whirlpool laundry center | WGT3300XQ3 | Washer/dryer control panel parts |
| Model #MGDC200XW2 Maytag dryer | MGDC200XW2 | Top and console parts |
| Model #11070802990 Kenmore dryer | 11070802990 | Top and console |
| Model #MGDC200XW1 Maytag dryer | MGDC200XW1 | Top and console parts |
| Model #MGDC200XW0 Maytag dryer | MGDC200XW0 | Top and console parts |
| Model #MGDC200XW4 Maytag dryer | MGDC200XW4 | Top and console parts |
| Model #11071202010 Kenmore dryer | 11071202010 | Top and console parts |
Reviews
Easy to install!
I watched the installation video twice, got the tools out and had the new switch installed in 20 minutes even though the wires attached to the old switch were separate, not in a nice bundle like in the video. I took a photo before I began and then transferred one wire at a time from the old switch to the new switch. Very easy!
Bonny, Saco, ME
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
easy to install
only took about 10 minutes, works like new. factory on off switch
Louis, MS.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
easy to install
turn off breaker and unplug. common sense. unplug one wire at a time and install in proper place on new one.
rob8827, north ga
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Just what we needed
Simple part replacement. Unhooked old one and hooked up new one. Works like a charm.
LatoyaR, Dallas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Nice to have a working dryer again.
My experience with obtaining and replacing the pysh to start switch was easy. It was nice to have a dryer again.
Undisclosed, Lake Placid, NY
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
quality part
part arrived as scheduled. Fit perfectly and the dryer is working as before.
old P, Yuma, AZ.
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Kenmore Dryer start button not functioning.
Part fit as expected (after verifying dryer model compatibility). Installed in 10 minutes. Dryer worked just fine. The problem that was corrected was that dryer start button no longer had to be pushed to start dryer. Just having it plugged in and door shut let dryer start. If turned to off position it would stop and then advance to next cycle and restart by itself. It would also stop (and stay stopped) if door was opened. Dryer now works completely as it should. What a relief.
William f C M, Columbia MD
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
A perfect fit!
After looking almost endlessly, we finally found this switch! When we got it, we installed it quickly and easily. Loved the speediness of it all as well!
Kat2015grad, Pelham, Alabama
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes