$6.76 |
13% OFF Phone Price : $7.76
CONFIRM THE PART FITS
Part Information
This fuel tank (part number 34186A) is for lawn and garden equipment engines.
Fuel tank 34186A holds the gas that's needed by the engine.
Work in a well-ventilated area when installing this part. Drain the existing fuel from the tank and disconnect the spark plug wire before beginning the repair.
Frequently Used Together
- $66.60 |31% OFF MSRP : $96.00
- $2.49 |29% OFF Phone Price : $3.49
- $63.59 |7% OFF Phone Price : $68.59
- $4.17
- $6.74 |13% OFF Phone Price : $7.74
- $4.14 |19% OFF Phone Price : $5.14
- $2.49 |29% OFF Phone Price : $3.49
- $7.59 |12% OFF Phone Price : $8.59
- $11.51
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #H50-65417L Tecumseh lawn & garden engine | H50-65417L | Basic engine |
| Model #HS50-67099A Tecumseh lawn & garden engine | HS50-67099A | Basic engine |
| Model #HS50-67119C Tecumseh lawn & garden engine | HS50-67119C | Basic engine |
| Model #HS50-67106A Tecumseh lawn & garden engine | HS50-67106A | Basic engine |
| Model #143716022 Craftsman lawn & garden engine | 143716022 | Basic engine |
| Model #40226302 Craftsman lawn sweeper | 40226302 | Motor / frame and housing assembly |
| Model #HM80-155135C Tecumseh lawn & garden engine | HM80-155135C | Basic engine |
| Model #HS50-67106C Tecumseh lawn & garden engine | HS50-67106C | Basic engine |
| Model #HM80-155141C Tecumseh lawn & garden engine | HM80-155141C | Basic engine |
| Model #HMSK80-155-144-C Tecumseh lawn & garden engine | HMSK80-155-144-C | Basic engine |
Reviews
New larger tank was not a good fit
The tank fit but the it was much larger than the original tank and the fuel was too short to reach the new larger tank connector.
Steve K, Severn, Maryland
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Fuel outlet was on wrong end of the tank!!!
Had to get more fuel line to go to the tank outlet.
Bobby, Illinois
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Easy to install
Great match would like to have the safety box for the belt drive gear
Robert, Jonesboro Arkansas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Fuel nipple was on opposite site
Unfortunately because the fuel nipple was on the opposite side from the original fuel tank the fuel line that I purchased was too short
Budd, Philadelphia
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
New tank
Was said to be a hard item to get but here it is. The price is about the same across the board.
Bigger D, Dallas GA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
very easy to install,
Easy to install, hope it lasts longer than the last one. My last two lasted about two years then leaks from the seam around the center.
b.tanber, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes