CONFIRM THE PART FITS
Range Bake Igniter WP7432P143-60
Part #WP7432P143-60
Part Information
This bake igniter (part number WP7432P143-60) is for ranges.
Bake igniter WP7432P143-60 ignites the gas to light the bake burner.
Shut off the house circuit breaker and gas supply before installing this part. Wear work gloves to protect your hands.
Frequently Used Together
- $53.71 |9% OFF Phone Price : $58.71
- $50.89 |9% OFF Phone Price : $55.89
- $97.89 |9% OFF Phone Price : $107.89
- $45.39 |10% OFF Phone Price : $50.39
- $47.86 |9% OFF Phone Price : $52.86
- $79.49 |6% OFF Phone Price : $84.49
- $112.96 |8% OFF Phone Price : $122.96
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #MGR6775BDS19 Maytag gas range | MGR6775BDS19 | Manifold parts |
Model #66578002800 Kenmore Elite gas range | 66578002800 | Manifold parts |
Model #66578002802 Kenmore Elite gas range | 66578002802 | Manifold parts |
Model #MGR6775BDQ17 Maytag gas range | MGR6775BDQ17 | Manifold parts |
Model #66578003803 Kenmore Elite gas range | 66578003803 | Manifold parts |
Model #MGR6875ADW28 Maytag gas range | MGR6875ADW28 | Manifold parts |
Model #MGR6775BDW18 Maytag gas range | MGR6775BDW18 | Manifold parts |
Model #66578002801 Kenmore Elite gas range | 66578002801 | Manifold parts |
Model #66578009804 Kenmore Elite gas range | 66578009804 | Manifold parts |
Model #MGR6875ADS27 Maytag gas range | MGR6875ADS27 | Manifold parts |
Reviews
Easy to install
It took about 30 minutes to install. I did have to access the back panel of the stove in order to properly connect the igniter however, over all, an easy project!
SKYY, Richmond, RI
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Okay was damaged in the box.
It took 3 months to arrive ghgggggghjjkbbcrtggvvffghhhh
Uh y, Anywhere
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
Easy to install
It was only a few screws in the oven and then a few on the back panel to hook up
Jim B, Coshocton Ohio
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Maytag gas oven bake igniter
The part worked fine. Pretty easy to install. Just need to remove several screws to get access to the igniter in the oven and to the connector behind the back panel. There are videos online too.
Tfff, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
igniter for oven.
Delivery was prompt, exact part as advertised and installed easily. 5 stars.
JEFFREY M, pITTSBURGH, PA
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Fixed without much issue
Pretty easy to use. Plug works only one way. Have to dig through some insulation to get to the plug. I attempted to pull from only the front, but don't recommend that. Open up the back and push cord through, much easier.
Dune2006, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Ignitor for lower oven
Once looking up model number of oven, found part in the parts breakdown schematic. Very easy to replace igniter.
BMP o H, Huntsville, AL
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Worked!
Installed this part and the oven is as good as new. The video from the repair clinic on YouTube described how to change it.
John543456, Ft Lauderdale
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour