CONFIRM THE PART FITS
Dryer Lint Screen 5304513574
Part #5304513574
Part Information
This lint screen (part number 5304529766) is for dryers.
Lint screen 5304529766 traps lint and debris from the exhaust air flowing from the dryer.
Follow the instructions in the owner's manual for installing this part.
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #ELFE753CAW0 Electrolux dryer | ELFE753CAW0 | Front panel/lint filter |
Model #ELFE753CAT0 Electrolux dryer | ELFE753CAT0 | Front panel/lint filter |
Model #ELFE763CBT0 Electrolux dryer | ELFE763CBT0 | Front panel/lint filter |
Model #ELFE7537AW0 Electrolux dryer | ELFE7537AW0 | Front panel/lint filter |
Model #ELFG7637BW0 Electrolux dryer | ELFG7637BW0 | Front panel/lint filter |
Model #ELFE7437AW0 Electrolux dryer | ELFE7437AW0 | Front panel/lint filter |
Model #ELFG7537AT0 Electrolux dryer | ELFG7537AT0 | Front panel/lint filter |
Model #ELFG7637AT0 Electrolux dryer | ELFG7637AT0 | Front panel/lint filter |
Model #ELFE763CAT0 Electrolux dryer | ELFE763CAT0 | Front panel/lint filter |
Model #ELFE7337AW0 Electrolux dryer | ELFE7337AW0 | Front panel/lint filter |
Reviews
Easy to install
My husband and I did this together. It works for for my517 model. No more taking it apart every 6 months to clean lint out of blower wheel.you have to reset the dryer by plugging it in and unplugging it again. And you might have to unplug the moisture censor and plug it back in to reset the dryer.but it works.
Dscp, Ohio
1 person thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to install, need #10-2 2" screws (stainless)
You need 2 #10-2, 2" stainless steel screws to install the new lint screen assembly. Took less than 10 minutes to complete. We will see in a month if this new assembly keeps the lint off of the blades.
JEC027, Howell, NJ
2 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy to install
This splint screen is much better than the one that came with the dryer. It really does trap way more lint than the original straight screen. I also replaced the piece that this fits into, using the original moisture sensor wiring harness from the dryer and replacing the two original screws with 2' number 10's stainless steel. The dryer blower is no longer filling up with lint.
JJCB, Deland
3 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Easy fix
Found a solution to my Electrolux gas dryer collecting lint in the blower wheel causing vibration and noise via YouTube. The new filter design should capture more lint and prevent the excessive buildup on the blower wheel.
Mcp96, York PA
2 people thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- Less than 30 minutes
Exactly what I ordered
Replaced a faulty designed filter assembly. Work perfectly
JD f, Oklahoma city
2 people thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- Less than 30 minutes
Perfect Fit
Easy to install. It took me a little while to complete the project because I removed the entire front to thoroughly clean the blower and inside of the dryer.
Too m l, Chicago
2 people thought this review was helpful.
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour