CONFIRM THE PART FITS
Part Information
This speed selector cable (part number 946-04397A) is for snowblowers.
Speed selector cable 946-04397A connects the speed control lever to the ground drive system in the snowblower.
Follow the instructions in the manual when installing this part.
Frequently Used Together
- $6.47 |60% OFF MSRP : $16.00
- $27.71 |15% OFF Phone Price : $32.71
- $9.90 |17% OFF MSRP : $12.00
- $24.62 |17% OFF Phone Price : $29.62
- $87.75 |12% OFF MSRP : $100.00
- $26.13 |16% OFF Phone Price : $31.13
- $27.67 |25% OFF MSRP : $37.00
- $87.80 |20% OFF MSRP : $110.00
- $31.16 |32% OFF MSRP : $46.00
- $5.71
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #31AS63EE793 MTD gas snowblower | 31AS63EE793 | Handle panel/handles |
Model #24710568 Craftsman gas snowblower | 24710568 | Clutch lock handle assembly |
Model #247881720 Craftsman gas snowblower | 247881720 | Handle panel/handle/chute |
Model #247881721 Craftsman gas snowblower | 247881721 | Chute/handle |
Model #247881722 Craftsman gas snowblower | 247881722 | Chute/handles |
Model #247881723 Craftsman gas snowblower | 247881723 | Handles/chute |
Model #247881730 Craftsman gas snowblower | 247881730 | Handle panel/chute |
Model #247881731 Craftsman gas snowblower | 247881731 | Chute/handles |
Model #247881732 Craftsman gas snowblower | 247881732 | Chute/handles |
Model #247881733 Craftsman gas snowblower | 247881733 | Handles/chute |
Reviews
Poor description.
Part didn't fit. The most important component of ordering the right cable is getting the right length. Incredibly, that measurement was not included in the product description. $19.95 to purchase, $9.95 to ship and $9.95 to return if want a refund. Wonder why Amazon is so popular?!? Terrible process.
Boomer1953, Colorado Springs, CO
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours
Yes, I would recommend this to a friend
east to install
took 30 min to install, part was exactly like old one
Dave, dayton oh
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Easy to Install
I am not the most handy guy but this was a 2 minute installation
lukeheaton, Long Island
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Very easy to install
as stated easy to install and only took about 15 minutes
POps, New Jersey
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Replacing drive cable
Just put shifter to top and remove top bolt. Then loosen bottom bolt . Put top cable in first an then put bottom cable in. Then put top bolt back in and adjust tension on cable. Then your done.
Dennis b m, bangor maine
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
It was easy to put on.
It was real easy to put on. It took about 10 minutes . Thank you
tcooper, Thomas Wv
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Including instructions would've been helpful!
The top of the cable is attached to the gear shift handle with a carter pin. I found it easier to access this spot by removing the bracket that the handle is attached too.
Dom I, Long Island, NY
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
don't know
you have to get the correct part before you can install it. It took 3 orders to get what I need.
not h, ohio
Did you find this review helpful?
- Ease of Installation
- Very Difficult
- Duration of Installation
- More than 2 hours