Snowblower Auger Drive Belt 581832401

Basic Information

• Part Name: Snowblower auger drive belt
• Manufacturer: Husqvarna
• Category: Snowblower
• Primary Function: Transfers power from the engine pulley to the auger pulley, allowing the auger to rotate and discharge snow efficiently

Installation & Compatibility

• Compatible Models: Fits select Husqvarna and Poulan snowblower models; confirm compatibility using your models parts diagram before ordering
• Installation Difficulty: Medium; requires removing the belt cover and routing the new belt around the pulleys
• Tools Required: Socket wrench set and work gloves

Additional Information

Snowblower auger drive belt 501818201 connects the engine drive pulley to the auger pulley, powering the auger blades that move and discharge snow through the chute. The belts proper tension ensures smooth operation and effective snow clearing.

If the auger stops turning, slips under load, or you hear squealing noises during operation, the belt may be stretched, cracked, or worn. Replacing it restores full power transfer and prevents damage to the drive system.

Before installation, disconnect the spark plug wire to prevent accidental starting. Remove the belt cover, release tension from the old belt, and route the new belt according to your service manual. Verify proper alignment and tension before securing the cover. Wear work gloves to protect your hands during installation.

Snowblower auger drive belt 501818201 replaces part number 581832401.