Washer Electronic Control Board EBR62545107

Pretty easy to install

It was my first time installing and start to finish it took me less than 40 min

Did the job

It fixed the problem and it arrived a day early which was great.

Part was delivered on time/

20 minutes to install/ no hassle at all/ 4 large loads later all well

Easy to install

It was an easy install, only 30 minutes and I washed for 8 hours. Thanks

Easy to install.

I watched a video which looked the same on inside as mine to replace computer board. Take your time. There are lots of plugs but the are color coated. Take pictures just in case.

Easy to install*

You have to move one module to make room and the connectors are still a bit hard to get to... Probably took me 20 minutes or less start to finish.

Difficult but doable if you have patience

I highly recommend printing out the instructions as it helped guide what to move out of the way to get to the control board. Oh and don't forget to pull the plug from the outlet! With the numerous electronic connections I took lots of pictures. It took some time to get each connection off because many of them were in a tight space between other components on the board (capacitors, resistors, etc). Once that was done, four screws and the board slipped out. Fitting the new board back in the machine was challenging as the board didn't want to slide into place. After several beers and then lunch and examining the old and new board, I decided to modify but filing down some of the plastic standoffs and that did the trick. After the tedious task of connecting everything back up, I did a quick test run before closing it all up.