$261.79 |
$10.00 OFF Phone Price : $271.79
CONFIRM THE PART FITS
Part Information
This dispenser actuator pad (part number W10460952) is for refrigerators.
Dispenser actuator pad W10460952 attaches to the refrigerator dispenser housing and activates the dispenser.
Unplug the refrigerator before installing this part.
Frequently Used Together
- $155.09 |15% OFF MSRP : $183.04
- $782.69
- $22.69 |18% OFF Phone Price : $27.69
- $184.99 |5% OFF Phone Price : $194.99
- $6.49 |59% OFF MSRP : $16.00
- $359.81 |$10.00 OFF Phone Price : $369.81
- $208.31 |23% OFF MSRP : $270.00
- $75.57 |6% OFF Phone Price : $80.57
- $17.09 |34% OFF MSRP : $26.00
Top models using the same part
| Model Name | Model Number | Diagram Name |
|---|---|---|
| Model #10651783416 Kenmore side-by-side refrigerator | 10651783416 | Dispenser parts |
| Model #59672389413 Kenmore bottom-mount refrigerator | 59672389413 | Dispenser front parts |
| Model #59672382413 Kenmore bottom-mount refrigerator | 59672382413 | Dispenser front parts |
| Model #10651783412 Kenmore side-by-side refrigerator | 10651783412 | Dispenser parts |
| Model #10651133213 Kenmore refrigerator | 10651133213 | Dispenser parts |
| Model #10651764510 Kenmore side-by-side refrigerator | 10651764510 | Dispenser parts |
| Model #10651783413 Kenmore side-by-side refrigerator | 10651783413 | Dispenser parts |
| Model #10651134213 Kenmore refrigerator | 10651134213 | Dispenser parts |
| Model #10651764511 Kenmore side-by-side refrigerator | 10651764511 | Dispenser parts |
| Model #59672389411 Kenmore bottom-mount refrigerator | 59672389411 | Dispenser front parts |
Reviews
So far, working as good as the original part did.
Not too hard to replace, after watching videos. Would have been super helpful if the designers had put one particular screw easier to access for removal. But was able to make the change without removing that screw.
tom58, Anaheim, CA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Exact replacement part
The part was an exact replacement part. It did have some discoloration on the pad that made it look a little used. The part uses bent plastic to spring the actuator back into place after being pressed which is a serious design flaw. It's no wonder it needed to be replaced in around 5 years of use. It took me about 15 minutes to replace with the proper tools and a little help for holding one of the parts since the wiring harness didn't want to disconnect.
Fixit M, Orlando, FL
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
New Ice and water dispenser switch.
Although the refrigerator is only a few years old and should not be needing new parts, the ordered product plugged in and worked perfectly. Shipping time was reasonable.
RS w, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour
Wrong part
They sent me the wrong part twice now, and did not include installation instructions
Bigfog6, Undisclosed
Did you find this review helpful?
- Ease of Installation
- Difficult
- Duration of Installation
- 1 - 2 hours
Easy to install with DYI Sears Home Service video
Used Sears online Home Service chat to request link to DYI video for refrigerator Dispenser Activator Pad replacement. Everything was not exactly the same as I believe my model has changed, but it was sufficient to give me confidence and knowledge to replace the part myself. I saved over $200 in labor, and completed the task in less than 30 minutes. It helped that I'd previously watched the video and practiced removing the part.
PieceofCake, Scottsdale
Did you find this review helpful?
- Ease of Installation
- Easy
- Duration of Installation
- 30 minutes - 1 hour