Kenmore Elite 25344723106 refrigerator Parts

To find the cubic feet (capacity) of your Kenmore Elite refrigerator model 25344723106, check the capacity/specifications section in the 25344723106 owner's manual. If you need a quick estimate, you can calculate it by measuring the inside and converting cubic inches to cubic feet.

Option 1: Use the model information (most accurate)

We recommend using the model number and the manual because it lists the manufacturer’s stated capacity.

• Locate the model/serial plate inside the refrigerator compartment (often on an interior wall)
• Match the model number exactly: 25344723106
• Look for “capacity” or “cubic feet” in the specifications section of the 25344723106 owner's manual
• Use the stated capacity for comparisons (replacement shopping, energy use, storage planning)

Option 2: Calculate cubic feet from interior measurements (good estimate)

Measure the usable interior space (not the outside cabinet size).

• Empty the compartment enough to measure accurately
• Measure width, depth, and height in inches
• Multiply: width x depth x height = cubic inches
• Divide by 1728 to convert to cubic feet
• Repeat for freezer and fresh food sections if you want a combined estimate

Quick conversion table

What you have	What to do	Result
Interior measurements in inches	Multiply L x W x H	Cubic inches
Cubic inches	Divide by 1728	Cubic feet

Why it matters

Cubic feet helps you compare refrigerator sizes correctly. Two refrigerators can have similar exterior dimensions but different usable storage due to insulation thickness, shelving layout, and evaporator housing.

Last updated: January 2026

Yes. For the Kenmore Elite 25344723106 refrigerator, the most reliable reset is a power reset: turn the temperature control to OFF (if equipped), unplug the refrigerator for 5 minutes, then plug it back in and allow a full cool-down period (about 4 hours) to stabilize temperatures. See the 25344723106 owner's manual for control locations and operating steps.

How to do a safe reset (power reset)

• Move the temperature control to OFF (if your control has an OFF position).
• Unplug the refrigerator by gripping the plug (do not pull the cord).
• Wait 5 minutes to let the control and compressor protection reset.
• Plug the unit back in securely.
• Set the temperature control back to your normal setting.
• Allow a 4-hour cool-down period before judging cooling performance.

What a reset will and will not fix

A reset clears many temporary control issues, but it will not correct airflow restrictions, door seal leaks, or defrost failures.

Symptom after reset	Most common cause	What to check next
Runs a lot but temps slowly improve	Normal cool-down after restart	Wait 4 hours; limit door openings
Runs constantly and still warm	Door not sealing or warm air entering	Inspect/clean gasket; check door alignment
Frost buildup, weak airflow	Defrost system problem	Check defrost heater, thermostat, timer
No fan sound from freezer area	Evaporator fan issue	Inspect fan for ice blockage or failure

Quick checks we recommend before and after resetting

• Confirm the refrigerator is fully plugged in and the outlet has power.
• Check the house breaker or fuse if the unit is completely dead.
• Keep doors closed as much as possible during the first several hours.
• Make sure the door gasket is clean and sealing all the way around.
• If you suspect a defrost problem, review the defrost components such as the defrost timer 5304518034 and defrost heater 216730700.

Why it matters

Resetting correctly prevents unnecessary compressor stress and helps you diagnose the real issue. If temperatures do not improve after the full cool-down period, the problem is usually power, airflow, door sealing, or the defrost system rather than a control that simply needs resetting.

Last updated: January 2026

Common problems we see on the Kenmore Elite refrigerator model 25344723106 include not cooling well, running too long, moisture or frost buildup, odors, and doors that will not seal or close. Many issues trace back to airflow, dirty coils, door sealing, or defrost-system faults; start with the checks in the 25344723106 owner's manual.

Most common symptoms and what usually causes them

• Not cooling or weak cooling: dirty condenser coil, blocked vents, evaporator fan not running, or sealed-system trouble
• Runs too much/too long: warm room temps, frequent door openings, door slightly open, or dirty/warped gasket
• Excess frost or ice: defrost system problem (timer, heater, thermostat) or air leak at the door
• Water puddles or moisture: door not sealing, door left open, or defrost drain issue
• Unusual noises (buzzing/clicking/fan noise): fan motor wear, compressor/start components, or vibration from leveling

Quick checks we recommend first (no parts needed)

1. Confirm the temperature control is not set to OFF and the unit has power.
2. Make sure doors close fully and are not held open by bins or food packages.
3. Clean dust from the condenser area and allow proper airflow around the cabinet.
4. Check for frost on the back freezer panel (a strong clue of a defrost or airflow problem).
5. If moisture forms inside or outside, reduce door-open time and inspect the gasket sealing surface.

Parts that commonly fix these problems on model 25344723106

Symptom	Common fix area	Example part for this model
Frost buildup, warm freezer	Defrost system	Defrost timer 5304518034, defrost heater 216730700
Warm fridge, noisy freezer	Air circulation	Freezer evaporator fan motor 297309000
Sweating, poor cooling, long run time	Door sealing	Refrigerator door gasket (black) 5304507206

Why it matters

Cooling and frost issues usually get worse over time: a small air leak at the door gasket or a failing defrost component can lead to heavy ice buildup, restricted airflow, longer run times, and food temperature problems.

Last updated: January 2026