Craftsman 247374810 lawn mower Parts

Gas walk-behind mowers like the Craftsman 247374810 are not being phased out everywhere at once, but new gas mower sales are shrinking in some areas as more states and retailers push battery-electric options. Parts and maintenance support remain common for existing gas mowers.

In most cases, changes affect new equipment sales, not the mower you already own.

• Some locations restrict or plan to restrict sales of certain new gas-powered outdoor equipment
• Retailers may stock fewer gas models as demand shifts to battery mowers
• Service parts (belts, wheels, handles, chutes) typically stay available for years
• Used gas mowers and existing fleets continue operating normally

Keeping a gas mower reliable is mostly about fuel care, blade condition, and drive system upkeep.

• Use fresh fuel and avoid long-term storage with untreated gas
• Keep the underside of the deck clean to maintain airflow and cut quality
• Sharpen or replace the blade when the cut looks ragged
• If the self-propel drive slips or stops, inspect the drive belt and transmission area
• Confirm maintenance intervals and procedures in the 247374810 owner's manual

If your area tightens rules on new gas mower sales, the biggest impact is future purchasing choices. For current owners, good maintenance extends mower life and reduces the need for major repairs.

Last updated: January 2026

On the Craftsman walk-behind mower model 247374810, the model and serial number are typically printed on a sticker on the back of the mower deck, usually between the lower handle mounts. Use that exact model number when ordering parts or checking diagrams in the 247374810 owner's manual.

Check these common label locations first:

• Back of the deck, between the lower handle mounts (most common)
• Rear discharge area near the rear skirt
• Side of the deck near the height-adjustment bracket
• Under the grass bag opening (if equipped)
• On the handle support/bracket area

The sticker can be dirty or faded, so a quick cleanup helps.

• Brush off dry grass and debris first
• Wipe the label with a damp rag; avoid soaking it
• Use a flashlight at a low angle to make faint printing easier to see
• Take a photo and zoom in to confirm characters
• Write down both the model number and serial number for future reference

The model number ensures you get the correct parts for your exact deck and drive setup. For example, the correct self-propelled belt length and hardware can vary by model; using the right model number helps match items like the lawn mower ground drive belt, 3/8 x 31-1/4-in 954-04282 and other Craftsman-compatible components.

Last updated: January 2026

The model number for this Craftsman walk-behind gas lawn mower is 247374810. You’ll use 247374810 to match the correct parts diagrams, owner’s manual information, and replacement parts (such as the drive belt, blade adapter, or grass bag components).

Most walk-behind mowers list the model number on a product ID label. Common locations include:

• On the rear of the deck housing (near the discharge opening)
• On the top of the deck, behind the engine
• On the back panel near the bagging area
• Near the height-adjustment brackets on the deck

For label location and identification details specific to this mower, use the 247374810 owner's manual.

When ordering parts or troubleshooting, we recommend writing down these items from the ID label:

• Model number: 247374810
• Serial number (helps confirm production run)
• Engine model and type (often a separate label on the engine)
• Any product number or MTD-style identifier (if shown)

Craftsman walk-behind mowers can look similar across multiple years, but small design changes affect fit. Using 247374810 helps ensure parts like the 954-04282 ground drive belt or 687-02220 blade adapter match your deck and drive system.

Last updated: January 2026