Error Codes
Is the Frigidaire low-end?
Frigidaire is generally considered a value to mid-range appliance brand, not a luxury or premium line. For a Frigidaire FRSS2623AB8 side-by-side refrigerator, that typically means practical features, widely available replacement parts, and solid everyday performance at a more budget-friendly price point.
When people say “low-end,” they often mean fewer premium materials or fewer high-end convenience features, not that the refrigerator is unreliable.
Common differences you may notice:
- Fewer specialty features (for example, advanced drawer climate zones or premium finishes)
- More standard interior lighting and shelving options
- Simpler controls compared to premium models
- Lower purchase price and often lower repair-part costs
- Strong focus on core functions: cooling, ice, and water dispensing
A better way to evaluate “low-end vs. not” is to look at the things that affect day-to-day use and long-term upkeep.
| What to check | What it tells you | Example for this model page |
|---|---|---|
| Parts availability | How easy it is to maintain | Items like the refrigerator ice maker 5304532555 are listed for FRSS2623AB8 |
| Filtration support | Water quality and taste | The Frigidaire refrigerator water filter FPPWFU01 is available |
| Seal condition | Efficiency and temperature stability | Door gaskets are common wear items |
| Cooling consistency | Food safety and performance | Sensors and control boards are serviceable parts |
Brand “tier” matters less than whether your refrigerator is cooling correctly, sealing well, and getting proper airflow. If you are troubleshooting performance, start with basics (door seal, filter condition, and airflow) before assuming the unit is “low-end.”
If you need parts for FRSS2623AB8, order from the parts list for your model or search by model number on Sears PartsDirect.
For help diagnosing display codes or performance issues, use our Frigidaire refrigerator error codes guide.
Last updated: February 2026
What should a Frigidaire side by side refrigerator be set at?
For your Frigidaire FRSS2623AB8 side-by-side refrigerator, set the fresh food (refrigerator) section to 37°F and the freezer to 0°F; these settings keep food safely cold while helping the unit run efficiently.
- Refrigerator (fresh food): 37°F
- Freezer: 0°F
- Allow 24 hours after changing settings for temperatures to stabilize
- Use a refrigerator thermometer (not just the display) to confirm actual temps
- Keep vents clear so cold air can circulate between compartments
| Compartment | Target setting | What you may notice if too warm | What you may notice if too cold |
|---|---|---|---|
| Fresh food | 37°F | Milk spoils faster, soft produce, condensation | Lettuce freezes, drinks slush, items near vents freeze |
| Freezer | 0°F | Soft ice cream, frost buildup from longer run times | Excessively hard ice cream, more energy use |
If your FRSS2623AB8 will not reach or maintain these temperatures, focus on airflow, sealing, and cooling performance first.
- Make sure the doors close fully and the gaskets seal all the way around
- Clean dust from the condenser area (restricted airflow can raise temps)
- Confirm the evaporator fan is running and not blocked by frost
- Replace a damaged door seal if you feel cold air leaking around the edge (see how to fix a fridge door seal)
- If the unit is running but temperatures drift, a sensor issue is common; this model uses temperature sensors such as refrigerator temperature sensor 5303918775
Correct settings (37°F and 0°F) reduce food-safety risk, prevent freezing in the fresh food section, and help the compressor and fans cycle normally instead of running excessively.
Last updated: February 2026
Why is my Frigidaire freezer not freezing side by side?
If your Frigidaire FRSS2623AB8 side-by-side refrigerator freezer is not freezing, the most common causes are restricted airflow (blocked vents or a failed fan), poor heat removal (dirty condenser area), or a sealing/temperature-sensing problem that prevents the system from maintaining 0°F.
- Confirm the freezer is set to 0°F (fresh food typically 37°F).
- Make sure food packages are not blocking air vents in the freezer or fresh-food section.
- Listen for the evaporator fan (a steady fan sound when the compressor is running).
- Check the door closes firmly; inspect for gaps, tears, or warping in the gasket.
- Look for heavy frost on the back freezer panel (often points to a defrost or airflow issue).
- Verify the condenser area is not packed with dust and pet hair.
| Symptom | Most likely issue | What to do next |
|---|---|---|
| Freezer warm, fridge also warm | Heat not being rejected (condenser airflow problem) | Clean condenser area; ensure condenser fan runs |
| Freezer warm, fridge OK | Airflow problem in freezer | Check vents, evaporator fan, frost buildup |
| Heavy frost on freezer back wall | Defrost system problem | Defrost manually to restore airflow, then diagnose components |
| Temps swing or seem inaccurate | Sensor/thermistor issue | Test/replace temperature sensor |
If your checks point to a specific failure, these model-matched parts are commonly involved:
- Temperature sensing issues: refrigerator temperature sensor 5303918775 or refrigerator temperature sensor 240597220
- Door not sealing (warm air leaks cause poor freezing and frost): Frigidaire refrigerator freezer door gasket, black 241786014
- If cooling system work was recently done (sealed system opened): dryer filter 5303305677 (filter dryer)
A freezer that cannot hold temperature forces longer run times, increases frost risk, and can lead to food spoilage. Fixing airflow, sealing, or sensor problems early helps the cooling system stabilize and protects the compressor.
For model-relevant troubleshooting steps, we recommend:
- How to fix your evaporator cooling fan
- Diagnosing refrigerator thermistor problems video
- How to fix a fridge door seal
- Frigidaire refrigerator error codes
If you need to order parts, use the parts list for FRSS2623AB8 or search by model on Sears PartsDirect.
Last updated: February 2026
