Error Codes
How big is a Kenmore chest freezer model 25310311002?
Kenmore chest freezer model 25310311002 is a full-size chest freezer; exact exterior dimensions vary by production design and are best confirmed by measuring your unit. Most Kenmore chest freezers in this class are roughly 40 to 45 inches wide, 33 to 36 inches high, and 25 to 30 inches deep.
How to get the exact dimensions (fast and accurate)
- Width: measure the cabinet at the widest point (often the hinge area).
- Height: floor to the top of the closed lid.
- Depth: back of cabinet to the front edge; include the handle if it sticks out.
- Measure with the freezer level; uneven floors change height slightly.
- Note any side bump-outs or rear cover that adds depth.
Space planning: clearances to plan for
Chest freezers need airflow around the cabinet so the sealed system can shed heat.
| Location | Typical clearance | What it helps |
|---|---|---|
| Back | 2 to 3 inches | Heat dissipation and efficiency |
| Sides | 1 to 2 inches | Prevents hot spots |
| Top/front | Enough for full lid swing | Access and safety |
Why it matters
Correct measurements prevent delivery surprises, ensure the lid opens fully, and help the compressor run efficiently for steadier temperatures.
Parts that can affect front clearance and access
If you are placing the freezer tight to a wall or cabinet, these parts are commonly involved:
- Lock access: freezer door key 297147700
- Temperature setting access: freezer temperature control knob 216707200
- Interior light switch action: light plunger 297243800
Last updated: February 2026
How long should a Kenmore freezer last?
A Kenmore freezer like model 25310311002 typically lasts 10 to 15 years with normal household use, proper airflow around the cabinet, and routine cleaning. Heavy use, hot garage locations, and dirty condenser areas can shorten that lifespan.
Typical lifespan and what affects it
Most chest freezers fall into the same general life expectancy range, but these factors make the biggest difference:
- Room temperature: Hot spaces make the compressor run longer and wear faster.
- Airflow: Blocked vents or tight clearances trap heat.
- Condenser cleanliness: Dust buildup raises operating temperatures.
- Door seal habits: Frequent lid openings and poor sealing increase run time.
- Power quality: Repeated outages or surges stress electrical components.
Quick “is it worth repairing?” guide
Use this as a practical rule of thumb for model 25310311002.
| Freezer age | Common approach | Why |
|---|---|---|
| 0 to 5 years | Repair is usually worthwhile | Most failures are isolated parts |
| 6 to 10 years | Repair if cooling is strong and cabinet is solid | You can extend life with targeted fixes |
| 11 to 15 years | Repair only if the fix is minor | Major sealed-system repairs often cost more |
| 16+ years | Replace in most cases | Efficiency and reliability drop |
Parts that often matter as a freezer ages
If your freezer is running warm, not starting, or cycling oddly, these are common areas to check or replace:
- Temperature control components such as the freezer temperature control thermostat 216714600
- User controls like the freezer temperature control knob 216707200
- Compressor electrical support parts such as the chest freezer run capacitor 5304464438
Why it matters
Knowing the typical 10 to 15 year lifespan helps you decide whether to invest in a repair now or plan for replacement, especially if cooling performance is slipping or the compressor is running nearly nonstop.
Last updated: February 2026
Where is the model number on a Kenmore chest freezer?
On a Kenmore chest freezer like model 25310311002, the model number is printed on a rating label that’s usually inside the cabinet near the top rim, or on an exterior surface such as a side panel or the back. Use that number to match the correct parts list.
Most common label locations to check
- Inside the freezer on a side wall (upper area)
- Along the top rim just under the lid opening
- On the back of the cabinet near the power cord
- On an exterior side panel near the rear
- Near the hinge area under the lid (less common)
Quick steps to find it fast
- Unplug the freezer for safety.
- Open the lid and scan the upper inside walls and rim first.
- If you don’t see it, check the back and then both exterior sides.
- Wipe dust or frost off the label so the numbers are readable.
What the label helps you do
| What you need | Where it’s used | Why it matters |
|---|---|---|
| Model number (example: 25310311002) | Parts lookup | Ensures parts fit your exact Kenmore freezer |
| Serial number | Service history | Helps identify production details if needed |
Why it matters
Kenmore model numbers can look similar across different chest freezers, but parts like a temperature control knob, door key, or thermostat can vary by model. Using the exact model number prevents ordering the wrong replacement.
If you’re ordering parts after you find the label, we recommend starting with the parts list for model 25310311002 and matching by part name and ID (for example, the freezer door key 297147700).
Last updated: February 2026
