Briggs & Stratton 28U707-1112-E1 engine Parts

Yes. We still carry replacement parts for your Briggs 28U707-1112-E1 lawn and garden engine, and many common maintenance and repair items are available to ship now. You can order parts from the parts list for this model, or search by model number on Sears PartsDirect.

Parts you can still buy for model 28U707-1112-E1

These are examples of in-stock parts commonly needed for tune-ups and no-start issues:

• Briggs & statton air filter 496894S for routine maintenance and restricted-airflow problems
• Briggs & statton filter 394358S for scheduled service intervals
• Briggs & statton fuel line (red) 791766 when fuel lines are cracked, soft, or leaking
• Briggs & statton armature 591459 when there is no spark (after basic checks)
• Briggs & statton key 222698S if the engine backfires or timing seems off after an impact

How we recommend matching the correct part

Briggs engines often have similar-looking parts across different series, so matching by the full engine model is the safest approach.

• Use the exact model number: 28U707-1112-E1
• Match the part ID on the parts list to what you are replacing
• Compare the part name and where it installs (air intake, ignition, fuel system)
• If you are unsure, replace common wear items first (filters, fuel line)

Quick guide: symptom to likely part category

Symptom	Most common area to check	Example part on this model page
Starts then dies	Fuel delivery, stale fuel, clogged filter/line	Briggs & statton fuel line (red) 791766
Cranks but no spark	Ignition components, kill wire issues	Briggs & statton armature 591459
Runs rough, black smoke	Air restriction, dirty filter	Briggs & statton air filter 496894S
Sudden backfire after hitting object	Flywheel key timing shift	Briggs & statton key 222698S

Why it matters

Using the correct Briggs part for 28U707-1112-E1 helps prevent hard starting, poor performance, and repeat failures. It also saves time by avoiding returns caused by near-match parts that do not fit your exact engine.

Last updated: February 2026

To find the right Briggs engine parts for model 28U707-1112-E1, we match parts to the exact engine model and any TYPE/CODE on the ID tag, then select the replacement by part ID and description from the parts list. You can also search by model on Sears PartsDirect.

Step-by-step: how we recommend finding the correct part

• Locate the engine identification stamping or tag (commonly on the blower housing or valve cover area).
• Write down the full model number exactly as shown: 28U707-1112-E1.
• If your engine tag lists a TYPE and CODE, record those too; they narrow down exact variations.
• Identify the system you are repairing (air intake, fuel, ignition, starting, charging).
• Choose the matching part by part ID and part name; avoid ordering by appearance alone.

Common parts customers replace on this engine

These are good starting points for routine maintenance and common no-start checks:

• Air filtration: Briggs & statton air filter 496894S
• Fuel delivery: Briggs & statton fuel line (red) 791766
• Starting system: Briggs & statton lawn & garden equipment engine starter drive assembly 593934
• Ignition wiring: Briggs & stratton lawn & garden equipment engine spark plug boot 691909
• Flywheel timing: Briggs & statton key 222698S

Quick guide: which part to look at first

Symptom	Most likely system	Example part on this page
Starts then dies	Fuel delivery	Fuel line, carb inlet fitting
Won’t crank	Starting circuit	Starter drive assembly, solenoid
Weak or intermittent spark	Ignition	Spark plug boot, armature
Runs rough, black smoke	Air intake	Air filter

Why it matters

Small engine parts are often model- and type-specific. Using the exact 28U707-1112-E1 identification helps prevent ordering a filter, starter component, or ignition part that looks similar but does not fit.

Last updated: February 2026

The Briggs 28U707-1112-E1 is the engine model itself; it identifies a specific Briggs single-cylinder, 4-cycle, air-cooled vertical-shaft lawn and garden engine configuration. For repairs and maintenance, we match parts to the full model and type code on the engine tag, then order from the parts list for 28U707-1112-E1 or search on Sears PartsDirect.

How to confirm the exact engine configuration (model, type, code)

Briggs engines often share the same base model (like 28U707) but use different type and code numbers that affect carburetion, ignition, charging system, and governor parts.

• Find the stamped or printed ID on the blower housing, valve cover, or recoil shroud
• Record all three fields: MODEL, TYPE, and CODE
• Match parts using the complete ID, not just the mower brand
• If the tag is dirty, wipe it and use a flashlight to read faint stamping
• Use the parts diagrams for 28U707-1112-E1 to avoid ordering the wrong ignition or fuel parts

Common parts that vary by type code (and why)

Even within the 28U707 family, these items commonly differ by type:

System	What can change	Example part on this model page
Air intake	Filter style, housing, pre-cleaner	Air filter 496894S
Fuel	Fuel line size, inlet fitting style	Fuel line (red) 791766
Ignition	Armature style, kill-wire routing	Armature 591459
Starting	Starter drive design	Lawn & garden equipment engine starter drive assembly 593934

Why it matters

Using the full 28U707-1112-E1 identification (including type and code) prevents mismatched parts that can cause hard starting, surging, no-spark conditions, or fuel leaks after installation.

Last updated: February 2026