LG LRMWS2906S/00 bottom-mount refrigerator Parts

For many households, yes: an LG bottom-mount design like the LRMWS2906S puts fresh-food items at eye level and keeps the freezer in a lower drawer, so everyday groceries are easier to reach and organize. “Better” depends on how you shop, cook, and use freezer space.

• You use the refrigerator section more than the freezer (milk, produce, leftovers).
• You want less bending for daily items; the freezer is accessed less often.
• You like wide shelves and door bins for tall bottles and meal prep containers.
• You prefer drawer-style freezer storage for bagged foods and bulk items.

• You access frozen foods constantly (a top-freezer can be quicker for frequent freezer use).
• You want the simplest layout and lowest upfront complexity.
• You need maximum freezer visibility at a glance (upright-style freezer layouts can feel easier).

Most people open the refrigerator section far more than the freezer. With a bottom-mount, we keep the most-used items in the most ergonomic spot, which helps reduce bending and makes meal prep faster.

• Set temperatures to typical targets: 37°F for fresh food and 0°F for freezer.
• Avoid blocking air vents; airflow keeps temperatures even.
• Keep door gaskets clean so the doors seal tightly.
• Use the freezer drawers to separate everyday items from long-term storage.

For model-specific features, storage components, and installation guidance, use the LRMWS2906S owner's manual. If you need replacement parts for doors, sealing, or ice making, you can order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

On the LG LRMWS2906S bottom-mount refrigerator, we remove a shelf by tilting the front edge up, lifting the shelf straight up, then pulling it out. This same method works for the lower (bottom) refrigerator shelf as long as the shelf is clear of food and bins.

• Remove food items from the shelf.
• Pull out and remove any drawers or bins that block the shelf from sliding forward.
• Tilt the front of the shelf up.
• Lift the shelf straight up to unhook it from the side supports.
• Pull the shelf out of the refrigerator.

Most “stuck shelf” issues are caused by the shelf hooks still engaged in the slots or by a drawer/door bin interfering.

• Confirm the shelf front is tilted up before lifting.
• Lift straight up (do not twist); twisting can bind the rear hooks.
• Slide the shelf forward only after it is unhooked.
• Check that the doors are fully open so the shelf clears the door liner.
• If you are removing the shelf to access the water filter area, remove the top shelf first if it is set in the highest position (the manual calls this out for filter access).

To reinstall, we tilt the front up, set the shelf hooks into the slots at the desired height, then lower the front so the hooks drop into place.

A properly seated shelf keeps airflow consistent for even cooling and prevents spills or broken glass. It also makes routine tasks like cleaning and water filter access easier.

For the exact shelf removal illustrations and cautions for your model, use the owner's manual. You can also find replacement parts for your refrigerator on this model’s parts list or search by model number on Sears PartsDirect.

Last updated: February 2026

If your LG LRMWS2906S is leaking from the bottom, the most common causes are a clogged defrost drain (water backs up and spills into the base), a leaking water supply connection to the ice maker/dispenser, or a problem in the ice maker water circuit. Use the LRMWS2906S owner's manual to confirm safe access and cleaning steps.

• Look for a sheet of ice or standing water under the crisper drawers (often points to a defrost drain issue).
• Check the water line connection at the back for drips; tighten fittings if you see moisture.
• Make sure the house shutoff valve is fully open; a partially open valve can cause odd ice maker behavior.
• Inspect the freezer floor for ice buildup (meltwater can run forward and out).
• If the leak appears only when dispensing water or making ice, focus on the inlet valve, tubing, and ice maker fill path.

If troubleshooting points to a failed component, these are common leak-related replacements for the LRMWS2906S:

• Refrigerator drain tube 5251JA3003D (helps when the drain path is restricted or misrouted)
• Ice maker assembly (AEQ72909602) - refrigerator ice maker part by LG AEQ72909602 (for ice maker housing or fill leaks)
• Valve assembly,water AJU73432831 (for seepage or overfilling issues)

Bottom leaks can damage flooring and also lead to ice buildup that blocks airflow, which makes the refrigerator work harder and can cause temperature swings in the fresh food and freezer sections.

You can order replacement parts for your LG LRMWS2906S from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

The most common LG refrigerator problem is a cooling complaint: the fresh food section gets warm, the freezer temperature rises, or temperatures swing. For LG model LRMWS2906S, we start with the built-in troubleshooting steps in the LRMWS2906S owner's manual, especially power checks, control settings (including Demo/Display Mode), and airflow.

• Refrigerator section not cold enough
• Freezer not freezing consistently
• Food freezing in the refrigerator section
• Unit runs often but temperatures do not recover
• Intermittent cooling after doors were left open or the unit was overpacked

• Confirm power: check the home breaker and any GFCI outlet; reset if tripped.
• Check control settings: make sure the refrigerator control is not set to OFF (on models that have that option).
• Exit Demo/Display Mode: press and hold Refrigerator and Ice Plus together for 5 seconds to toggle Display Mode.
• Adjust temperatures correctly: change settings one increment at a time, then wait for temperatures to stabilize.
• Improve airflow: keep items away from air vents and avoid blocking return vents.
• Check room temperature: do not operate the refrigerator in temperatures below 55°F (13°C).

If the checks above do not fix the issue, these model-compatible parts are commonly involved in cooling and temperature regulation:

• Fan assy ADP73273402 (moves air through the compartments)
• Refrigerator temperature sensor 6500JB2002X (feeds temperature information to the control)

Cooling problems often look like a major failure, but they are frequently caused by a tripped breaker, Demo/Display Mode, blocked vents, or an incorrect temperature setting. Fixing those first protects food and prevents unnecessary part replacement.

Last updated: February 2026