LG LRMWS2906S/00 bottom-mount refrigerator Parts

For many households, yes: an LG bottom-mount design like the LRMWS2906S puts fresh-food items at eye level and keeps the freezer in a lower drawer, so everyday groceries are easier to reach and organize. “Better” depends on how you shop, cook, and use freezer space.

When a bottom-mount refrigerator is the better choice

• You use the refrigerator section more than the freezer (milk, produce, leftovers).
• You want less bending for daily items; the freezer is accessed less often.
• You like wide shelves and door bins for tall bottles and meal prep containers.
• You prefer drawer-style freezer storage for bagged foods and bulk items.

When another style may fit better

• You access frozen foods constantly (a top-freezer can be quicker for frequent freezer use).
• You want the simplest layout and lowest upfront complexity.
• You need maximum freezer visibility at a glance (upright-style freezer layouts can feel easier).

Quick comparison

Feature	Bottom-mount (like LRMWS2906S)	Top-freezer	Side-by-side
Fresh-food access	Best	Good	Good
Freezer access	Good	Best	Fair
Wide shelf space	Best	Good	Fair
Frozen-food organization	Very good (drawers)	Fair	Good

Why it matters

Most people open the refrigerator section far more than the freezer. With a bottom-mount, we keep the most-used items in the most ergonomic spot, which helps reduce bending and makes meal prep faster.

Tips to get the most from your bottom-mount layout

• Set temperatures to typical targets: 37°F for fresh food and 0°F for freezer.
• Avoid blocking air vents; airflow keeps temperatures even.
• Keep door gaskets clean so the doors seal tightly.
• Use the freezer drawers to separate everyday items from long-term storage.

For model-specific features, storage components, and installation guidance, use the LRMWS2906S owner's manual. If you need replacement parts for doors, sealing, or ice making, you can order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

On the LG LRMWS2906S bottom-mount refrigerator, we remove a shelf by tilting the front edge up, lifting the shelf straight up, then pulling it out. This same method works for the lower (bottom) refrigerator shelf as long as the shelf is clear of food and bins.

Steps to remove the bottom refrigerator shelf

• Remove food items from the shelf.
• Pull out and remove any drawers or bins that block the shelf from sliding forward.
• Tilt the front of the shelf up.
• Lift the shelf straight up to unhook it from the side supports.
• Pull the shelf out of the refrigerator.

If the shelf will not come out

Most “stuck shelf” issues are caused by the shelf hooks still engaged in the slots or by a drawer/door bin interfering.

• Confirm the shelf front is tilted up before lifting.
• Lift straight up (do not twist); twisting can bind the rear hooks.
• Slide the shelf forward only after it is unhooked.
• Check that the doors are fully open so the shelf clears the door liner.
• If you are removing the shelf to access the water filter area, remove the top shelf first if it is set in the highest position (the manual calls this out for filter access).

Reinstalling and leveling the shelf

To reinstall, we tilt the front up, set the shelf hooks into the slots at the desired height, then lower the front so the hooks drop into place.

What to check	What “good” looks like	What happens if it is off
Shelf hooks seated	Both sides fully engaged	Shelf can rock or fall
Shelf level	Left and right sides even	Spills, sliding items
Glass temperature	Not cleaned with warm water while cold	Glass can crack

Why it matters

A properly seated shelf keeps airflow consistent for even cooling and prevents spills or broken glass. It also makes routine tasks like cleaning and water filter access easier.

For the exact shelf removal illustrations and cautions for your model, use the owner's manual. You can also find replacement parts for your refrigerator on this model’s parts list or search by model number on Sears PartsDirect.

Last updated: February 2026

If your LG LRMWS2906S is leaking from the bottom, the most common causes are a clogged defrost drain (water backs up and spills into the base), a leaking water supply connection to the ice maker/dispenser, or a problem in the ice maker water circuit. Use the LRMWS2906S owner's manual to confirm safe access and cleaning steps.

Quick checks we recommend (start here)

• Look for a sheet of ice or standing water under the crisper drawers (often points to a defrost drain issue).
• Check the water line connection at the back for drips; tighten fittings if you see moisture.
• Make sure the house shutoff valve is fully open; a partially open valve can cause odd ice maker behavior.
• Inspect the freezer floor for ice buildup (meltwater can run forward and out).
• If the leak appears only when dispensing water or making ice, focus on the inlet valve, tubing, and ice maker fill path.

Most likely causes and what to do

What you notice	Most likely cause	What usually fixes it
Water appears after defrost cycles; puddle inside fridge	Clogged/iced defrost drain	Thaw and clear the drain path; flush with warm (not hot) water
Water only when making ice	Ice maker fill leak or cracked line	Inspect fill tube and connections; replace the ice maker if it’s leaking
Water at back/bottom near wall	Water line connection seep	Tighten compression nut; reseat ferrule; recheck for leaks
Random puddles; warm temps too	Airflow/defrost issue causing excess melt	Check door seal and airflow; address fan/defrost problems

Parts that commonly solve bottom leaks on this model

If troubleshooting points to a failed component, these are common leak-related replacements for the LRMWS2906S:

• Refrigerator drain tube 5251JA3003D (helps when the drain path is restricted or misrouted)
• Ice maker assembly (AEQ72909602) - refrigerator ice maker part by LG AEQ72909602 (for ice maker housing or fill leaks)
• Valve assembly,water AJU73432831 (for seepage or overfilling issues)

Why it matters

Bottom leaks can damage flooring and also lead to ice buildup that blocks airflow, which makes the refrigerator work harder and can cause temperature swings in the fresh food and freezer sections.

You can order replacement parts for your LG LRMWS2906S from the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

The most common LG refrigerator problem is a cooling complaint: the fresh food section gets warm, the freezer temperature rises, or temperatures swing. For LG model LRMWS2906S, we start with the built-in troubleshooting steps in the LRMWS2906S owner's manual, especially power checks, control settings (including Demo/Display Mode), and airflow.

Most common symptoms

• Refrigerator section not cold enough
• Freezer not freezing consistently
• Food freezing in the refrigerator section
• Unit runs often but temperatures do not recover
• Intermittent cooling after doors were left open or the unit was overpacked

Quick checks we recommend first (no tools)

• Confirm power: check the home breaker and any GFCI outlet; reset if tripped.
• Check control settings: make sure the refrigerator control is not set to OFF (on models that have that option).
• Exit Demo/Display Mode: press and hold Refrigerator and Ice Plus together for 5 seconds to toggle Display Mode.
• Adjust temperatures correctly: change settings one increment at a time, then wait for temperatures to stabilize.
• Improve airflow: keep items away from air vents and avoid blocking return vents.
• Check room temperature: do not operate the refrigerator in temperatures below 55°F (13°C).

What to do based on what you see

What you observe	Most likely cause	Best next step
No lights, no cooling	Power supply issue	Reset breaker/GFCI; verify outlet power
Lights on, but warm	Demo/Display Mode or settings	Exit Display Mode; recheck set temps
Refrigerator too cold	Set temp too low or airflow issue	Raise temp 1 step; clear vents
Items freezing near vents	Airflow hitting food or cold room	Move items; confirm room temperature

Parts that can be involved if cooling problems persist

If the checks above do not fix the issue, these model-compatible parts are commonly involved in cooling and temperature regulation:

• Fan assy ADP73273402 (moves air through the compartments)
• Refrigerator temperature sensor 6500JB2002X (feeds temperature information to the control)

Why it matters

Cooling problems often look like a major failure, but they are frequently caused by a tripped breaker, Demo/Display Mode, blocked vents, or an incorrect temperature setting. Fixing those first protects food and prevents unnecessary part replacement.

Last updated: February 2026