Thermador PRG486EDG01 range Parts

On the Thermador PRG486EDG01 gas range, you typically adjust a burner’s low (simmer) flame by removing the burner knob and turning the small valve adjustment screw on the valve stem in tiny increments until the flame is steady and does not go out on LOW.

Before you start (safety and setup)

• Turn the burner OFF and let grates and burner parts cool completely.
• Ventilate the area; if you smell gas, stop and shut off the gas supply.
• Use a small flat-blade screwdriver that fits the adjustment screw snugly.
• Adjust one burner at a time so you can compare results.
• Keep the flame blue and stable; a small yellow tip can happen briefly, but steady yellow flames indicate an air or fuel issue.

Steps to adjust the low flame (simmer)

1. Light the burner and let it run on HIGH for 30 to 60 seconds.
2. Turn the knob down to the lowest flame setting.
3. Pull the knob straight off the valve stem.
4. Locate the low-flame adjustment screw on the valve stem behind the knob.
5. Turn the screw in very small moves (about 1/8 turn at a time):
   • Clockwise usually lowers the flame.
   • Counterclockwise usually raises the flame.
6. Reinstall the knob, cycle from HIGH to LOW a few times, and confirm the flame stays lit on LOW.

What “correct” looks like

Check	Normal result	What it suggests if not normal
Flame color	Mostly blue	Yellow/sooty: burner needs cleaning or air mix issue
Stability on LOW	Does not flicker out	Too low: increase slightly
Ignition	Lights promptly	Clicking/no light: ignition or igniter issue

If the flame still won’t stay lit

• Clean the burner ports and cap seating; misalignment can cause an unstable simmer.
• Confirm the burner is lighting consistently; repeated ignition problems can point to an igniter or ignition component.
• If multiple burners act the same, the issue can be in the ignition system or control.

Helpful parts to consider for ignition-related symptoms:

• Thermador igniter 00418885
• Thermador ignition 00619017

Why it matters

A properly set low flame prevents nuisance flame-outs (unburned gas odor risk) and improves simmer control, while an overly high low setting can overcook delicate foods and waste fuel.

Last updated: February 2026

On your Thermador range, the model number is printed on the appliance ID label, usually around the oven door opening or on the frame behind the storage or warming drawer. For your range, look for PRG486EDG01 on that label.

Common model number label locations (Thermador ranges)

Check these spots in order; the label is typically a silver or white sticker/plate with model and serial:

• Along the oven door frame (open the oven door and look on the left or right front frame)
• On the underside of the cooktop lip near the front edge (visible when you lean down and look up)
• Behind the lower drawer (storage or warming drawer); pull the drawer out and look on the frame
• On a side panel edge near the front (less common)

What the label looks like and what to write down

We recommend copying the information exactly as shown so you can match parts correctly.

Label field	What it’s used for	Example for this model
Model number	Finds the correct parts diagram and fit	PRG486EDG01
Serial number	Helps identify production version	(varies)
FD or date code (if shown)	Helps narrow revisions	(varies)

Why it matters

Thermador ranges can have multiple versions that look similar. Using the exact model number helps ensure parts like an igniter, control, or spark module match your PRG486EDG01 gas range.

Parts you may need once you have the model number

If you’re troubleshooting ignition or heating issues, these are common PRG486EDG01-RELATED parts customers check first:

• Thermador igniter 00418885 (burner or oven ignition symptoms)
• Thermador cooktop igniter 00618624 (spark module type ignition problems)
• Thermador control unit 00619016 (control or display behavior issues)

For general range identification and component overview, see what are the main parts of a stove.

Last updated: February 2026

If the igniter on your Thermador range model PRG486EDG01 is not sparking, the most common causes are no power to the range, a wet or dirty igniter tip, a misaligned burner cap, or a failed ignition component. Start with cleaning and burner alignment, then move to electrical checks.

Quick checks we recommend first

• Confirm the range has power (clock/display on, breaker not tripped).
• Make sure the burner cap and burner head are seated flat and centered.
• Dry the burner area completely (recent boil-overs and cleaning can stop sparking).
• Clean the igniter tip gently; use a cotton swab lightly dampened with water, then let it fully dry.
• Listen for clicking: constant clicking usually points to moisture, dirt, or a stuck switch.

What the symptoms usually mean

What you notice	Most likely cause	What to do next
No clicking on any burner	Power issue or failed ignition module	Check breaker; if power is good, suspect ignition module
Clicking but no spark at one burner	Dirty/wet igniter or misaligned cap	Clean/dry; reseat cap and head
Weak/intermittent spark	Dirty igniter, poor connection, failing module	Clean first; then inspect wiring and module
Clicking won’t stop after lighting	Moisture or stuck ignition switch	Dry thoroughly; clean around knob area

Parts that commonly fix “no spark” problems

If cleaning and alignment do not restore sparking, these model-compatible parts are common fixes:

• Thermador igniter 00418885: individual igniter that creates the spark at a burner.
• Thermador ignition 00619017: ignition component used in the spark system (often replaced when spark output is inconsistent).
• Thermador cooktop igniter 00618624: spark module that distributes high-voltage spark to the burners.

Why it matters

A burner that does not spark can leave unburned gas at the burner if the valve is opened without ignition. Restoring reliable sparking improves lighting performance and helps prevent nuisance clicking and delayed ignition.

Last updated: February 2026