Kenmore 10673002511 refrigerator Parts

For Kenmore refrigerator model 10673002511, the most reliable way to get cubic feet is to look up the capacity in the specifications section of the 10673002511 owner's manual. If you need a quick estimate, we can calculate it by measuring the usable interior space and converting cubic inches to cubic feet.

Best ways to find cubic feet (capacity)

• Check the manual specs: Look for “capacity” or “cubic feet” in the product specifications section of the 10673002511 owner's manual.
• Measure and calculate (good estimate): Measure the usable interior height, width, and depth (in inches), then convert.
• Use model prefix clues carefully: Kenmore model prefixes (like 106) identify the manufacturing source family, but they do not reliably encode cubic feet.

How to calculate cubic feet from measurements

1. Empty the compartment enough to measure flat surfaces.
2. Measure width x height x depth of the main refrigerator compartment in inches.
3. Multiply those numbers to get cubic inches.
4. Divide by 1,728 to convert to cubic feet.

• Use interior liner dimensions, not the outside cabinet.
• Subtract space taken by fixed features (air towers, ice box, control housings) for a closer “usable” number.

Quick conversion table

What you have	What to do	Result
Interior inches (W x H x D)	Multiply	Cubic inches
Cubic inches	Divide by 1,728	Cubic feet
Two compartments (fridge + freezer)	Calculate each, then add	Total capacity

Why it matters

Cubic feet helps you compare storage space, choose the right refrigerator water filter, and set realistic expectations for airflow and temperature stability. If you are also replacing filtration parts, match by model to avoid fit issues (for example, Kenmore refrigerator water filter 9081).

Last updated: February 2026

For Kenmore refrigerator model 10673002511, the safest way to choose the correct filter is to match the filter part ID listed for your exact model and confirm the installation location shown in the owner's manual. On this model’s parts list, the compatible refrigerator water filter is Refrigerator water filter 9081.

The quickest way to confirm the right filter

• Match your refrigerator’s model number to 10673002511 (usually on an inside wall or ceiling of the fresh food compartment).
• Use the model-specific parts list and select the exact filter by part ID.
• If your dispenser flow is weak, replace the filter first; a clogged filter is a common cause.
• If you use reverse osmosis (RO), make sure your system can maintain adequate pressure; the manual notes RO setups can be affected by filtration and pressure.
• After installing a new filter, flush water through the dispenser to clear air and carbon fines.

Filters commonly used on this model

Filter type	What it does	When to replace
Refrigerator water filter 9081	Improves taste and reduces contaminants in dispenser water and ice	About every 6 months (typical), or sooner if flow drops
Refrigerator air filter W10311524	Helps reduce food odors inside the refrigerator	When the control indicates order/replace/expired (varies by use)

Why it matters

Using the correct Kenmore water filter for model 10673002511 protects water flow to the dispenser and ice maker, helps maintain water taste, and prevents avoidable issues like slow dispensing or small ice cubes.

Helpful tip for Kenmore filter changes

For step-by-step guidance and filter style identification, use how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

Kenmore refrigerator model 10673002511 is a Whirlpool-built Kenmore model. The quickest way to tell is the Kenmore model prefix: 106 is one of the manufacturer codes used for Whirlpool-produced Kenmore refrigerators (the rest of the digits identify the specific design and features).

How to confirm it on your refrigerator

You can verify the manufacturer code by checking the model tag and matching the first three digits.

• Look for the model/serial label inside the fresh food compartment (often on a side wall or near the crisper area)
• Confirm the model number starts with 106
• Use the model number when ordering parts to ensure exact fit
• Keep the model and serial number handy before starting any repair

For model-specific identification details and labeling locations, use the 10673002511 owner's manual.

Why the manufacturer matters for parts and repairs

Knowing Whirlpool built this Kenmore model helps because many internal components and troubleshooting steps follow Whirlpool-style designs (controls, ice maker, water system, door sealing system). That makes it easier to match the correct replacement part and avoid look-alike parts that do not fit.

Common part categories you may need

System	What it affects	Example part for this model
Water filtration	Taste, flow, dispenser performance	Kenmore refrigerator water filter 9081
Ice maker	Ice production and harvest	Refrigerator ice maker assembly 4317943
Water supply	Filling ice maker, dispenser flow	Refrigerator water inlet valve WPW10279909
Cooling airflow	Even temps in fresh food section	Refrigerator evaporator motor WPW10464673

Ordering the right parts

When you shop for parts for Kenmore 10673002511, always match by model number first, then confirm the part ID.

• Use the exact model number 10673002511
• Match the part ID and part name (not just a photo)
• Replace filters on schedule to prevent low flow and ice issues

If you are replacing the water filter, our step-by-step guide can help: how to replace the water filter in a Kenmore refrigerator.

Why it matters

Using the correct Whirlpool-built Kenmore parts helps restore proper cooling, water dispensing, and ice production; it also reduces repeat failures caused by mismatched components.

Last updated: February 2026

Most Kenmore refrigerators, including model 10673002511, do not use one universal “reset” button; resets are done by power-cycling the refrigerator or by resetting specific features from the control panel (for example, the air filter status). For exact button locations and sequences, use the 10673002511 owner's manual.

Quick ways we reset a Kenmore 10673002511 refrigerator

• Power-cycle reset (most common): unplug the refrigerator, wait about 5 seconds, then plug it back in.
• Control initialization reset: after plugging back in, wait 30 seconds before opening doors/drawers or touching the control panel.
• Exit Cooling Off or Showroom mode: if cooling is off, turn cooling back on using the controls (the refrigerator will not cool in these modes).
• Door-open alarm reset: close both doors fully; the alarm feature resets after the doors are closed.

Resetting specific indicators (example: air filter)

If the air filter indicator shows Replace Filter or the icon is lit/flashing, we reset that status after replacing the filter:

• Replace the air filter.
• Press and hold AIR FILTER for 3 seconds to reset the air filter status back to “Good.”

If you need the replacement filter for this model, use the refrigerator air filter W10311524.

What to check before you “reset”

A reset helps with control glitches, but it will not fix a failed part. Check these basics first:

• Confirm the power cord is fully plugged into a grounded outlet.
• Check the home breaker or fuse.
• Make sure cooling is turned on (not Cooling Off or Showroom mode).
• Close doors and drawers completely (open doors can trigger alarms and affect cooling).
• After a new install or long power loss, allow 24 hours for temperatures to stabilize.

Common reset methods and what they affect

Reset method	What it clears	When to use it
Unplug 5 seconds, then wait 30 seconds	Control initialization issues	Unresponsive controls, odd display behavior
Hold AIR FILTER 3 seconds	Air filter status indicator	After replacing the air filter
Close doors fully	Door Open alarm cycle	Alarm sounding or Door Open icon flashing

Why it matters

Using the correct reset prevents unnecessary part replacement and helps the electronic control board reinitialize properly. If cooling is off due to a mode setting, no amount of temperature adjustment will make the refrigerator cool faster.

Last updated: February 2026