GE GDF510PSR5SS dishwasher Parts

Yes, it’s often worth fixing a GE dishwasher like model GDF510PSR5SS when the problem is isolated (leak, no drain, poor cleaning) and the repair is a common part replacement rather than repeated electrical failures. If repairs are frequent or major, replacement can make more sense.

We recommend weighing the symptom, the likely parts involved, and how often the dishwasher has needed service.

• Repair is usually a good bet when the issue is one of these:
  • Not draining or leaving water in the tub (often a drain path or pump issue)
  • Leaking at the door or tub edge (often a gasket or seal issue)
  • Not cleaning well (often spray arm or filtration related)
  • Not filling consistently (often a water inlet problem)
  • One-time control issue after a power event (sometimes a fuse)
• Replacement is more likely when:
  • Multiple different failures happen within a short time
  • The dishwasher has recurring electronic/control problems
  • The tub is damaged or corrosion is widespread

These are model-matched parts that often solve high-impact problems without replacing the whole dishwasher:

• Won’t drain: inspect/replace the dishwasher drain pump WD19X25461
• Leaks at the tub opening: inspect/replace the dishwasher tub gasket WD08X23476
• Won’t fill or fills slowly: inspect/replace the water valve assembly WD15X27703

A targeted repair can restore performance, avoid the cost and disruption of a new installation, and keep your kitchen setup unchanged. The key is matching the fix to the symptom and using model-correct GE GDF510PSR5SS parts.

If you’re seeing a code or blinking pattern, use GE dishwasher error codes to narrow the failure before buying parts.

Last updated: January 2026

We do not recommend “staying away” from any one dishwasher brand across the board; reliability varies by model, installation, water quality, and how it’s used. If you’re comparing options to (or replacing) a GE dishwasher like model GDF510PSR5SS, focus on serviceability, parts support, and common failure points such as leaks, draining, and control issues.

When we help customers choose or evaluate a dishwasher, we look for practical signals that reduce headaches over time:

• Strong parts availability for wear items (spray arms, pumps, door seals, control components)
• Simple, proven wash system (fewer specialty features can mean fewer failure points)
• Good leak protection and easy-to-clean filtration
• Clear error-code diagnostics and straightforward troubleshooting
• Local service support and reasonable repair costs

Many negative reviews come from the same few symptoms, regardless of brand:

• Leaks at the door, tub gasket, or sump seals
• Won’t drain due to a failing pump or blockage
• Poor cleaning from clogged spray arms or restricted water flow
• No heat or poor drying from heating circuit issues
• Dead or glitchy controls from control board or UI problems

If you’re troubleshooting a current unit, our GE dishwasher error codes guide can help you interpret what the dishwasher is reporting.

On GE model GDF510PSR5SS, leaks are often tied to sealing surfaces. If you see water at the front corners or along the bottom of the door, inspect the tub gasket and baffles for tears, flattening, or debris.

• For perimeter sealing, check the dishwasher tub gasket WD08X23476
• For corner splash control, inspect the dishwasher tub corner baffle WD08X21894
• Confirm the dishwasher is level and the door closes evenly

“Brands to avoid” lists can push you toward the wrong decision. A well-supported model with available parts and clear diagnostics is usually a safer long-term choice than chasing a brand reputation alone.

Last updated: January 2026

On the GE GDF510PSR5SS dishwasher, the most common issue we see is drain-related trouble (water left in the bottom of the tub). Other frequent complaints include the detergent cup not opening, not filling, door leaks, and odor; the right fix depends on which symptom you have.

• Not draining: clear the filter area and sump, confirm the drain hose is not kinked, and check the sink/disposal connection.
• Detergent cup not opening: make sure dishes are not blocking the dispenser door; then suspect the dispenser if it still sticks.
• Not filling: verify the shutoff valve is fully open and the inlet screen is not clogged.
• Leaking at the door: clean the sealing surfaces, then inspect the gasket and corner baffles for damage.
• Bad smell: clean the filter area, remove standing water, and run a cleaning cycle.

If troubleshooting points to a failed component on model GDF510PSR5SS, these parts are commonly involved:

• Dishwasher drain pump WD19X25461 (drain problems)
• Detergent module WD12X28239 (detergent cup issues)
• Water valve assembly WD15X27703 (fill problems)
• Dishwasher tub gasket WD08X23476 (door/tub leaks)

These problems can look similar; for example, poor cleaning can be caused by low fill, a drain restriction, or a spray issue. Starting with the most common checks helps avoid unnecessary part replacement and gets your GE dishwasher back to normal faster.

For more symptom-based troubleshooting, use our dishwasher common questions resource.

Last updated: January 2026