Craftsman 10323151 18" jig saw Parts

Power saws come in several common types, each designed for a specific kind of cut. For a Craftsman 10323151 18" jig saw, the closest “family” is the jigsaw category, which is built for curved cuts, cutouts, and controlled straight cuts in wood, plastic, and some metals.

• Circular saw: Fast straight cuts in sheet goods and framing lumber.
• Jigsaw: Curves, inside cutouts, and short straight cuts (great for detailed work).
• Reciprocating saw: Demolition cuts through wood, nails, and metal.
• Miter saw: Accurate crosscuts and angle cuts for trim and framing.
• Table saw: Repetitive straight cuts and ripping boards to width.
• Band saw (portable or stationary): Smooth curves and resawing thicker stock.
• Chainsaw (gas or electric): Cutting logs, limbs, and outdoor wood.

Choosing the right saw improves cut quality and safety. For example, using a jigsaw like the Craftsman 10323151 for long rip cuts can lead to wandering cuts, while a circular saw or table saw is built to track straight.

• Match the blade type to the material (wood, metal, laminate).
• Use a straightedge guide for cleaner straight cuts.
• Let the blade do the work; avoid forcing the tool.
• Reduce orbital action (if equipped) for cleaner cuts in thin material.
• Clamp the workpiece to prevent vibration and blade deflection.

For general DIY repair and safety best practices, see are diy appliance repairs safe.

Last updated: February 2026

For intricate cuts, a scroll saw is the best choice for tight curves and fine detail; a coping saw is the best low-cost hand-tool option. For your Craftsman model 10323151 (18" jig saw), use a narrow blade and slower speed for controlled, detailed work.

• Scroll saw: Best overall for delicate patterns, inside cutouts (with a starter hole), and very tight radii.
• Coping saw: Best for small trim work and quick, tight curves in thin stock.
• Jig saw (like Craftsman 10323151): Best when you need portability and can accept a slightly wider turning radius.
• Band saw: Great for curves in thicker wood, but not as precise for tiny details.

• Use a narrow, fine-tooth blade (higher TPI for wood; specialty blades for metal/plastic).
• Slow the speed and let the blade cut; forcing the tool bends the blade and widens the kerf.
• Support the workpiece close to the cut line; clamp it to reduce vibration.
• For inside cutouts, drill a starter hole and begin the cut from the hole.
• Use a zero-clearance support (a sacrificial backer board) to reduce tear-out.

Intricate cuts demand control more than power. Choosing the right saw (or setting up your Craftsman 10323151 correctly) reduces blade wandering, tear-out, and rework, especially on tight-radius curves.

For more DIY safety basics before repairs or adjustments, use our guide: are diy appliance repairs safe.

Last updated: February 2026

Guarding rules for circular saws apply to saws that use a rotating circular blade with an upper and lower blade guard. Craftsman model 10323151 is an 18-inch jig saw (reciprocating blade), so it does not use circular-saw upper/lower blade guards; use jig-saw style guarding and safe operating practices instead.

Circular saw guidance mentions an upper guard and a retracting lower guard around a round blade. A jig saw like the Craftsman 10323151 uses a vertical, reciprocating blade, so the safety focus is different.

• Circular saw: upper guard plus spring-loaded lower guard that covers the blade below the shoe
• Jig saw: blade guard(s) and hold-down(s) near the blade, plus keeping hands clear of the cut line
• Circular saw: guard clearance for bevel cuts at the shoe
• Jig saw: table tilt and blade access require guarding near the blade and safe work support

Before using or servicing the saw, we recommend these checks:

• Verify any blade guard or hold-down assembly is installed and positioned correctly for the workpiece
• Confirm the blade is tight, straight, and appropriate for the material (wood, plastic, light metal)
• Keep the workpiece firmly supported on the table; use a push stick or clamp for small pieces
• Check the power cord and switch for damage; unplug before adjustments or blade changes
• Keep fingers out of the blade path; never reach under the table while the tool is plugged in

Using circular-saw guard requirements on a jig saw can lead to the wrong inspection steps. Correct guarding and work control on a reciprocating-blade saw reduces accidental contact and improves cut stability.

For general safety practices when doing tool or cord inspections, use are diy appliance repairs safe.

Last updated: February 2026

The model on this page, Craftsman 10323151, is an 18-inch jig saw, not a 10-inch table saw; motor size for a 10-inch Craftsman table saw depends on the exact table-saw model number on its nameplate. Once you have that model number, you can match the correct motor rating and replacement parts.

Use the saw’s data plate (often on the frame, under the table, or near the switch) and record the full model number and electrical ratings.

• Find the model number and serial number on the nameplate
• Write down voltage (commonly 120V on many homeowner saws)
• Write down amperage (often listed as A)
• Look for HP or watts if shown
• Note RPM if listed (some plates show motor RPM)

A fast way to avoid ordering the wrong motor is to confirm the model number first using how to find your appliance model number (and what it means for parts).

These are common ranges customers see on many 10-inch table saws; your exact rating is the one printed on your saw’s nameplate.

Motor size determines the right circuit, extension cord gauge, and whether the saw will maintain torque in thicker stock. Matching the motor to the correct model also ensures mounting, shaft size, and wiring connections fit.

Last updated: February 2026