Frigidaire PRFG2383AF3 bottom-mount refrigerator Parts

To remove the bottom freezer drawer on your Frigidaire PRFG2383AF3 bottom-mount refrigerator, fully extend the drawer, lift the front of the basket/drawer straight up to release it from the slide rails, then pull it forward and out. Most Frigidaire bottom drawers are designed to “pop up” off the rails.

Steps to remove the bottom freezer drawer

• Empty the drawer so it is lighter and easier to control.
• Pull the bottom drawer out as far as it will go.
• Grab the drawer/basket near the left and right front corners.
• Lift the front edge up firmly (it should rise and unhook from the rail tabs).
• While holding it up, pull the drawer straight toward you to remove it.
• Set the drawer on a towel to protect the floor and the drawer front.

If it will not lift out

These quick checks usually solve the “stuck drawer” problem:

• Check for ice buildup around the rails or basket; defrost and dry the area.
• Make sure food packages are not wedged behind the basket.
• Pull evenly on both sides; twisting can bind the slides.
• Inspect the rails for damage or a missing stop.
• If a roller is broken or the drawer drags, replace the roller before reinstalling.

A common wear item is the electrolux refrigerator crisper drawer roller 5304508016 (a damaged roller can make drawers feel like they are locked in place).

Reinstalling the drawer (quick guide)

Task	What to do
Align	Set the drawer back onto both slide rails evenly
Seat	Push in slightly, then press down so it locks onto the rails
Verify	Open and close fully to confirm smooth travel

Why it matters

Removing the bottom drawer correctly prevents bent slide rails, cracked basket frames, and door seal issues that can lead to frost buildup and poor cooling.

Last updated: February 2026

The most common problem we see with Frigidaire refrigerators like model PRFG2383AF3 is a cooling complaint (fresh food section warm, freezer too warm, or temperature swings). The usual causes are restricted airflow, dirty condenser coils, a weak fan motor, or a leaking door seal.

Most common symptoms and what they usually point to

• Fridge warm but freezer cold: airflow issue in the fresh food section, damper/air tower problem, or evaporator fan issue
• Both sections warm: dirty condenser coils, condenser fan problem, or sealed system/compressor issue
• Frost buildup on freezer back wall: defrost system issue or door not sealing
• Noisy humming or rattling: fan blade rubbing, failing fan motor, or debris near the condenser area
• Ice maker not making ice: restricted water supply, clogged filter, or ice maker assembly issue

Quick checks we recommend before replacing parts

1. Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
2. Make sure vents are not blocked by food packages.
3. Clean condenser coils and confirm the condenser area has good airflow.
4. Check door closing and gasket contact all the way around.
5. If you have dispenser or ice issues, replace the water filter and purge air from the line.

Parts on this PRFG2383AF3 page that commonly solve these problems

Problem area	What fails most often	Example part on this page
Poor cooling, warm temps	Evaporator fan not moving air	Frigidaire refrigerator evaporator fan motor 809069206
Frost, moisture, warm spots	Door seal leaking air	Frigidaire refrigerator freezer door gasket (gray) 5304537408
Temp swings, odd readings	Thermistor/temperature sensor	Refrigerator temperature sensor 5303918775
Slow water, weak ice production	Clogged water filter	Frigidaire refrigerator water filter FPPWFU01
No ice or intermittent ice	Ice maker mechanism failure	Ice maker,assembly ,freezer ,twist tray A21755301

Why it matters

Cooling and ice maker problems often start small (slower recovery, soft ice, minor frost) and then turn into food-spoilage temperatures or heavy frost that blocks airflow. Catching airflow and sealing issues early prevents bigger failures.

Helpful DIY guidance

• Use Frigidaire refrigerator error codes to interpret any displayed fault codes before replacing parts.
• If cooling is weak and you suspect airflow, follow how to fix your evaporator cooling fan to diagnose fan and airflow issues.
• For water and ice complaints, how to replace the water filter in a Frigidaire refrigerator helps you match and install the correct filter style.

Last updated: February 2026

A bottom leak on your Frigidaire PRFG2383AF3 bottom-mount refrigerator is usually caused by a clogged or frozen defrost drain that overflows into the cabinet and runs down to the floor. Less often, the drain pan is out of position or cracked, or a door seal problem is creating excess condensation.

Quick checks we recommend first

• Look for water under the front center of the refrigerator (often points to a defrost drain or drain pan issue).
• Check for ice or standing water on the freezer floor (common sign of a frozen defrost drain).
• Confirm the refrigerator is level and slightly tilted back so doors self-close.
• Inspect the freezer door gasket for gaps, tears, or areas not sealing.
• If the leak happens only when dispensing water or making ice, focus on the water filter and supply line.

Step-by-step: clear a clogged or frozen defrost drain

1. Unplug the refrigerator.
2. Remove the freezer drawer/bins so you can access the bottom panel area.
3. If you see ice on the freezer floor, melt it with warm (not boiling) water.
4. Flush the drain opening with warm water until it flows freely.
5. Clean debris from the drain hole using a soft tube cleaner or zip tie (avoid sharp tools).

Why it matters

When the defrost drain is blocked, defrost water has nowhere to go; it spills into the freezer, then leaks out the bottom. Clearing the drain stops the leak and helps prevent ice buildup and temperature swings.

If the leak is related to the water system

If you notice leaking during ice maker fill cycles or right after changing the filter, check these items:

• Make sure the filter is fully seated and locked in place.
• Inspect the filter housing area for drips.
• Check the water line connection behind the refrigerator for seepage.

Helpful parts to consider:

• Frigidaire refrigerator water filter FPPWFU01

Common causes and what you’ll see

What you notice	Most likely cause	What to do
Water under fridge, no dispenser use	Clogged/frozen defrost drain	Clear and flush the drain
Water only after filter change or dispenser use	Filter not seated or housing leak	Reseat filter; inspect housing
Moisture, frost, or sweating near door	Door gasket not sealing	Clean/reshape gasket; replace if torn

For door-seal troubleshooting steps, use our guide: how to fix a fridge door seal.

Last updated: February 2026