Craftsman 917376061 lawn mower Parts

On Craftsman walk-behind mower model 917376061, the model and serial numbers are printed on a decal on the rear of the lawn mower housing. We recommend writing both down exactly as shown so you can match the correct parts and owner’s manual.

Check these spots in order:

• Rear of the mower deck housing (most common on this model)
• Rear skirt area just above the discharge opening
• Near the height adjuster brackets on the deck (if the decal was relocated)
• On the handle support area (less common)

If the decal is dirty, wipe it with a damp rag and mild soap; avoid harsh solvents that can remove the print.

Write down these items exactly as they appear:

• Model number (example format: 917.376061)
• Serial number
• Date of purchase (helpful for maintenance tracking)

The model number identifies the correct parts list for your mower, and the serial number helps confirm the right version when there are mid-production changes.

Once you have the model number, match parts by description and diagram callout. Common wear items for this mower include:

• Blade (example: lawn mower blade 532406713)
• Drive belt (example: belt 532157769)
• Drive control cable (example: lawn mower drive control cable 532194653)

For the exact decal location and the full parts breakdown, use the 917376061 owner’s manual.

Last updated: February 2026

Common problems on the Craftsman walk-behind mower model 917376061 are no-start conditions (stale fuel, dirty air filter, bad spark plug, disconnected plug wire), loss of power from airflow or fuel issues, uneven cutting from a worn or bent blade, and vibration from a loose blade or damaged blade adapter. See the 917376061 owner's manual for the model’s troubleshooting chart and corrections.

• Won’t start: stale fuel, out of fuel, dirty air filter, bad spark plug, plug wire off, control bar not held to the handle
• Loss of power: grass buildup under the deck, dirty air filter, cutting too much grass at once
• Poor cut (uneven): worn or bent blade, uneven wheel height settings, debris packed under the mower
• Excessive vibration: loose blade hardware, bent blade, broken blade adapter, bent crankshaft (often after striking an object)
• Hard to push or drive slows: grass dragging under the deck, cutting height too low, drive system wear (belt, transmission components)

1. Use fresh gasoline; drain and refill if fuel is old or contaminated.
2. Inspect and clean the underside of the deck (grass and debris buildup is a top cause of power loss and poor cut).
3. Check the spark plug and wire; reseat the wire firmly and replace the plug if fouled.
4. Verify the control bar is held against the handle while starting and running.
5. Inspect the blade and adapter; replace a damaged blade with the correct part for this model, such as the lawn mower blade 532406713.

These issues usually get worse quickly: a dull blade tears grass (poor lawn health), deck buildup strains the engine, and vibration can damage the crankshaft or loosen fasteners.

For blade service steps and safe removal, use our lawn mower blade removal tool guide.

Last updated: February 2026

A Craftsman “6.75” walk-behind mower is identified by its full model number on the mower’s rear housing decal. For this specific mower, the model number is 917.376061 (a 6.75 horsepower, 22-inch rear-discharge rotary lawn mower); confirm yours by matching the decal to the 917376061 owner's manual.

We use the model number to match the correct diagrams, blades, belts, and control cables.

• Look for a decal on the rear of the lawn mower housing.
• Record both the model number and serial number.
• Match the decal format to the identification section in the manual.
• If the decal is dirty, wipe it with a damp rag and mild soap (avoid solvents).

“6.75” is an engine power rating used across many Craftsman mowers; it is not unique enough to order parts by itself. The model number is what ties your mower to the correct parts list.

Once you confirm the model number, these are common “must match” items for Craftsman walk-behind mowers:

• Blade and blade adapter (correct center hole and length)
• Drive belt and transmission parts (self-propelled drive)
• Engine zone control cable (operator presence control)
• Wheels, dust covers, and height adjuster hardware

If you are replacing a wear item on model 917.376061, a common example is the lawn mower blade 532406713.

Using the correct model number prevents ordering a blade, belt, or control cable that fits a different 6.75-hp Craftsman platform but will not install or operate correctly on your mower.

Last updated: February 2026

Most gas walk-behind lawn mowers, including the Craftsman 917376061, typically last 8 to 10 years with normal residential use. Regular maintenance (oil changes, blade care, clean air filter, fresh fuel practices) is what most often determines whether you reach the high end of that range.

• Maintenance schedule: annual spark plug and air filter service helps the engine run cooler and cleaner.
• Blade condition: a bent or badly worn blade increases vibration and stress on the crankshaft.
• Deck cleanliness: grass buildup holds moisture and accelerates rust.
• Fuel storage habits: stale fuel and varnish shorten carburetor and fuel-system life.
• Operating conditions: sandy soil, heavy loads, and dusty mowing require more frequent service.

For model-specific maintenance intervals and storage steps, follow the 917376061 owner's manual.

• Replace or sharpen the blade regularly; use the correct replacement blade for your mower (example: lawn mower blade 532406713).
• Replace the spark plug and clean or replace the air filter at least once per year.
• Clean under the deck after mowing; scrape off packed clippings.
• Tighten loose hardware and inspect moving parts for wear each season.
• Prep for off-season storage if the mower will sit 30 days or more (clean, lubricate, secure fasteners, touch up rust).

Knowing the expected lifespan helps you decide whether to invest in wear items (blade, belt, wheels, transmission parts) or plan for replacement. On the 917376061, routine tune-ups and proper storage are the biggest drivers of long-term reliability.

Last updated: February 2026