Kenmore 79047859403 wall oven/microwave combo Parts

No. “30-inch” wall ovens are grouped by a nominal width, but the actual cabinet cutout width, height, and depth vary by brand and design. For Kenmore model 79047859403 (wall oven/microwave combo), you must match the installation cutout dimensions, not just the advertised 30-inch size.

What “30-inch” usually means

Most 30-inch wall ovens are designed to fit a common cabinet opening range, but manufacturers still vary in:

• Required cutout width (often around 28 1/2 to 29 7/8 inches)
• Required cutout height (single vs. double vs. combo units)
• Required cutout depth and rear clearance
• Trim overlap (how much the decorative trim covers the cabinet opening)
• Electrical junction box location and clearance needs

Model 79047859403 sizing details to check

For this Kenmore wall oven/microwave combo, use the cutout and clearance diagram in the installation guide before ordering cabinetry, a replacement unit, or planning a swap.

Key fit checks:

• Cutout width: confirm the minimum and maximum allowed
• Cutout height: combo units are typically much taller than a single wall oven
• Cutout depth: confirm cabinet depth and rear clearance
• Trim fit: verify the decorative trim sits flush against the cabinet
• Electrical: confirm junction box placement and required clearances

Quick comparison: why “30-inch” is not enough

What you compare	“30-inch” label tells you	What actually matters
Width	Approximate class	Exact cutout width range and trim overlap
Height	Not included	Exact cutout height for single/double/combo
Depth	Not included	Cabinet depth, rear clearance, door swing
Electrical	Not included	Junction box location and clearance

Why it matters

If the cutout is even slightly off, the oven may not slide in, the trim may not cover gaps, or the unit may not sit square. Matching the cutout specs prevents installation delays and avoids cabinet modifications.

Last updated: January 2026

For Kenmore wall oven/microwave combo model 79047859403, the model and serial number plate is located along the interior side trim and is visible when you open the oven door. Write down the full model and serial numbers exactly as shown before ordering parts or scheduling service.

Where to look on model 79047859403

Check these spots in order (with the oven door open):

• Interior side trim (the serial plate is visible when the door is opened)
• The front frame around the oven opening
• The door rim/edge area (near the hinge side on some units)
• If needed, look for a rating label inside the oven cavity near the side wall

What to record (and why)

When you find the serial plate, record these items:

• Model number (example: 79047859403)
• Serial number
• Lot number or letter (often printed near the serial)

Why it matters

Kenmore 790-series wall ovens can use different control boards, temperature sensors, door parts, and trim pieces depending on the exact model and production run. Having the full model and serial information helps us match the correct replacement part the first time.

Quick checklist

Item	What it’s used for
Model number	Identifies the exact product configuration
Serial number	Identifies the production run/version
Lot number/letter	Helps confirm compatible parts

For more label-location details and service information, use the 79047859403 installation guide and the 79047859403 owner’s manual.

Last updated: January 2026

A Kenmore wall oven/microwave combo like model 79047859403 saves space, but the main disadvantages are higher purchase and repair costs, tighter cooking capacity than separate units, and more complicated installation and service access because two appliances share one cabinet opening.

Common disadvantages to plan for

• Higher repair impact: if the microwave side or oven side fails, service can be more involved because components are stacked and share wiring and mounting.
• More complex installation: the unit is heavy and must be secured with mounting brackets to help prevent tipping when the door is open (installation details are in the installation guide).
• Capacity tradeoffs: you often give up microwave interior space and sometimes oven cavity flexibility compared to two separate appliances.
• Ergonomics: the microwave can sit higher than a countertop unit, which can be awkward for hot liquids.
• Performance compromises: combo layouts can limit venting and airflow; blocked vents can affect microwave cooking (see the 79047859403 owner's manual).

What this means for repairs and parts

Because a combo unit integrates two systems, troubleshooting usually starts with basic safety and access checks before replacing parts.

Symptom	More likely on	Typical next step
Microwave will not run or stops when door moves	Microwave section	Check door latches and interlock system; consider the microwave door interlock switch 5304493153 if testing shows it is faulty
Oven temperature seems inaccurate	Oven section	Test the sensor circuit; consider the frigidaire range oven temperature sensor 316217002 if resistance is out of range
Oven light out	Oven section	Replace the bulb first; use the range oven light bulb 316538904

Why it matters

A combo unit concentrates cost and downtime into one built-in opening. Planning for installation requirements, ventilation, and service access helps you avoid repeat failures and makes future repairs faster.

Last updated: January 2026