Craftsman 917376732 lawn mower Parts

For the Craftsman 917376732 walk-behind mower, the most common problems we see are drive system issues (won’t self-propel or slips), cutting and bagging problems (poor cut, clumping, weak discharge), and wheel or height-adjustment wear. Use the 917376732 owner's manual for model-specific adjustments and maintenance intervals.

Common symptoms and likely causes

• Won’t self-propel or drive is weak: worn or stretched ground drive belt, misadjusted or damaged drive cable, worn drive pawls or gears
• Uneven cut or poor mulching: dull/bent blade, deck packed with wet grass, cutting height set too low
• Bagging is weak or clogs: grass bag full or airflow restricted, rear door not sealing, discharge path blocked
• Wheel won’t roll smoothly: debris in wheel area, worn wheel parts, missing dust cover
• Height adjustment won’t hold: worn adjuster components or knob

Parts that commonly fix these issues

If your symptoms match, these are frequent wear items for this model:

• Drive problems: lawn mower drive control cable 532407816, poulan lawn mower ground drive belt, 3/8 x 33-3/16-in 532196857, drive pawl 532404845
• Cutting quality: lawn mower mulching blade 532406707
• Bagging and discharge: lawn mower grass bag assembly 583327401, rear door 532401813, deflector 532196053

Quick checks before replacing parts

1. Shut off the engine and disconnect the spark plug wire.
2. Tip the mower safely (air filter and carburetor side up is typical) and clear packed grass from the deck.
3. Inspect the blade for damage and tightness.
4. Check drive engagement: cable tension, belt condition, and whether the wheels “grab” when drive is engaged.

Symptom-to-part cheat sheet

Symptom	Most common fix	Example part on this model
Self-propel slips	Belt or cable	532196857 or 532407816
Clicking/no drive at wheels	Worn pawls	532404845
Ragged cut	Replace blade	532406707
Poor bagging	Bag/door/deflector issues	583327401 or 532401813

Why it matters

Drive and cutting components wear gradually; addressing them early prevents extra strain on the transmission, improves cut quality, and reduces clogging and repeated stalling.

Last updated: March 2026

A Craftsman walk-behind gas mower like model 917376732 typically lasts 10 years with normal residential use and basic maintenance. Regular oil changes, clean cutting airflow, and timely replacement of wear items (blade, drive belt, wheels) keep the mower reliable longer.

What affects lifespan most

• Engine maintenance: clean oil, clean air intake, fresh fuel
• Deck condition: keeping the underside clean reduces corrosion and drag
• Drive system wear: belt, pulleys, and drive cable adjustment
• Blade condition: a sharp, balanced blade reduces vibration and engine load
• Storage: dry storage and off-season fuel care prevent hard-start issues

Maintenance schedule we recommend

Task	Typical interval	Why it matters
Change engine oil	Every season or 25 hours	Prevents internal engine wear
Clean under deck	Every few mows	Improves cut quality and reduces rust
Inspect/replace blade	Inspect often; replace as needed	Protects engine and improves cutting
Check drive belt/cable	Each season	Keeps self-propel working correctly

Parts that commonly extend service life

If performance drops, these model-matched parts are common fixes:

• Replace a worn blade with the lawn mower mulching blade 532406707
• Restore self-propel drive with the ground drive belt 532196857
• Fix slipping or inconsistent drive with the drive control cable 532407816

Why it matters

Most “end of life” mower problems are actually wear-and-tear issues (blade, belt, cable, wheels) that reduce cutting and drive performance. Keeping those parts in shape helps your 917376732 mow cleaner, start easier, and avoid premature engine strain.

For model-specific maintenance steps and adjustments, follow the Craftsman 917376732 owner’s manual.

Last updated: March 2026

The model number is 917.376732; it’s printed on the Craftsman rotary lawn mower’s identification label and shown on the cover of the 917376732 owner's manual. This model is a power-propelled 22-inch multi-cut walk-behind mower.

Where to confirm the model number on the mower

We recommend checking the mower itself to match the exact number before ordering parts.

• Look for the model label on the mower deck (typically near the rear or side of the deck)
• Check the handle support area or rear door area for a sticker or plate
• Match all digits, including the dot (917.376732)
• Use the manual cover page as a second confirmation
• If the label is worn, compare the illustrated parts list in the manual to your mower

Model number vs. product or marketing names

Some Craftsman mowers are also sold under series names or retailer listings, but parts lookup is driven by the model number.

What you see	Example	What to use for parts
Model number	917.376732	917376732
Series/description	Rotary lawn mower, 22-inch	Use only as a cross-check
Engine family	Briggs & Stratton 650 Series	Helps identify engine parts, not the mower chassis

Why it matters

Using the exact model number ensures you get the correct blade, drive belt, wheels, and control cable for your specific deck and drive system.

If you’re ordering common wear items for this model, examples include the lawn mower mulching blade 532406707 and the poulan lawn mower ground drive belt, 3/8 x 33-3/16-in 532196857.

Last updated: January 2026