Frigidaire GRFC2353AF2 bottom-mount refrigerator Parts

If your Frigidaire GRFC2353AF2 refrigerator is not cooling, a true “reset” is usually a power reset plus restoring the correct temperature settings. Unplug the refrigerator (or turn off the breaker) for 5 minutes, power it back on, then allow 24 hours for temperatures to stabilize.

• Confirm the refrigerator is getting power (interior lights on, display on).
• Power reset: unplug for 5 minutes, then plug back in.
• Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
• Make sure “Cooling Off” or “Demo/Showroom” mode is not enabled (if your control panel has that feature).
• Keep doors closed as much as possible for the next few hours.

Not cooling is usually airflow, frost buildup, or a fan or sensor issue.

• Airflow: Do not block vents with food packages.
• Condenser area: Make sure the unit has breathing room and the condenser area is not packed with dust.
• Evaporator fan: If the freezer is cold but the refrigerator section is warm, the evaporator fan may not be moving air; see how to fix your evaporator cooling fan.
• Temperature sensing: A failed thermistor can cause incorrect cooling decisions; the model uses temperature sensors such as refrigerator temperature sensor 5303918775 and refrigerator temperature sensor 240597220.
• Door sealing: Warm air leaks can overwhelm cooling; inspect the gasket for gaps or tears.

A power reset clears minor control glitches, but persistent warm temperatures usually point to airflow, fan operation, or temperature sensing. Catching those early helps prevent food spoilage and reduces strain on the compressor.

For additional troubleshooting, check Frigidaire refrigerator error codes. If you need replacement parts for GRFC2353AF2, order from the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026

On a Frigidaire GRFC2353AF2 refrigerator, CF typically points to a communication fault between the user interface (display) and the main control system; it often shows up with cooling problems when the controls are not “talking” reliably.

• Power reset: Unplug the refrigerator (or switch off the breaker) for 5 minutes, then restore power.
• Confirm temperatures: Set fresh food to 37°F and freezer to 0°F, then give it 24 hours to stabilize.
• Check for obvious wiring issues: Look for pinched wires near door hinges and any loose connectors you can safely access.
• Listen for fans: You should typically hear the evaporator fan running at times; no fan sound can contribute to warm temps.
• Watch for repeat codes: If CF returns quickly after a reset, treat it as an active fault.

CF is most often caused by one of these issues:

• Loose or damaged wiring harness between the display/user interface and control
• Failed user interface board
• Failed main control board
• Temperature feedback problems that confuse the control system (thermistor/sensor issues)

If you are also seeing poor cooling, checking the temperature sensing circuit is a practical step; this model has multiple sensor options such as the refrigerator temperature sensor 5303918775.

When the controls cannot communicate reliably, the refrigerator may not run the compressor, fans, or defrost system correctly. That can lead to temperature swings, food spoilage risk, and repeated error codes.

We recommend matching parts by the full model number GRFC2353AF2 and using the parts list for this model. You can also search by model number on Sears PartsDirect if you are comparing multiple assemblies.

Last updated: February 2026

The main disadvantage of a side-by-side refrigerator is the tall, narrow compartment layout; wide items (pizza boxes, sheet pans, party platters) often do not fit well, and freezer organization can feel cramped. Your Frigidaire GRFC2353AF2 is a bottom-mount (French door style) refrigerator, so these drawbacks do not apply the same way.

• Narrow shelves and door bins limit wide or bulky containers
• Less full-width shelf space for fresh food compared with many French door designs
• Tall, narrow freezer section makes it easier to lose items behind others
• In-door ice and water can add maintenance points (filter, dispenser, ice maker)
• Two full-height doors can require more side clearance in tight spaces

Because GRFC2353AF2 is a bottom-mount refrigerator, you typically get wider fresh-food shelving and better platter storage than a side-by-side. If your goal is convenience, the tradeoff is that frozen foods sit lower in the bottom freezer.

Choosing the right layout affects daily usability more than total cubic feet. If you store wide trays often, side-by-side designs create frequent fit issues; bottom-mount and French door designs reduce that frustration.

• Measure your most common “wide items” before you shop or reorganize shelves
• Use clear bins to keep narrow freezer spaces organized
• Keep door seals clean and sealing tightly to prevent temperature swings
• If you use filtered water and ice, replace the filter on schedule (for this model, see Frigidaire refrigerator water filter FPPWFU01)

You can order replacement parts for your GRFC2353AF2 from the parts list for your model, or search by model number on Sears PartsDirect.

Last updated: February 2026