Kenmore Elite 72167909600 microwave Parts

For a Kenmore Elite countertop microwave like model 72167909600, we recommend leaving about 3 inches of clearance on the top and both sides, about 1 inch at the rear, and keeping the front edge of the microwave set back at least 3 inches from the counter edge to reduce tipping risk and help airflow.

Recommended clearance guidelines

Use these spacing targets as a practical baseline for most countertop microwaves:

• Top: ~3 inches
• Left side: ~3 inches
• Right side: ~3 inches
• Rear: ~1 inch
• Front setback: place the front edge 3 inches or more back from the counter edge

For model-specific placement notes (including any cabinet or shelf restrictions), follow the 72167909600 owner's manual.

Quick reference table

Location around microwave	Typical minimum clearance	Why it matters
Top	3 in.	Helps vent heat and prevents overheating
Sides	3 in.	Allows airflow and reduces heat buildup
Rear	1 in.	Prevents blocking rear vents and cord strain
Front (setback)	3 in. back from edge	Reduces accidental tipping and impact damage

Setup tips that prevent common problems

• Put the microwave on a flat, solid surface that will not flex.
• Keep paper towels, cookbooks, and plastic wrap away from side and top vents.
• Avoid tight cubbies unless they meet the same clearances and do not trap heat.
• Route the power cord so it is not pinched behind the cabinet or pulled tight.
• If the unit runs hot or shuts off, increase clearance and confirm vents are not blocked.

Why it matters

Countertop microwaves rely on airflow to cool internal components like the magnetron and high-voltage system. Good clearance helps prevent overheating, nuisance shutoffs, and premature wear, and the front setback helps keep the appliance stable during door use.

Last updated: January 2026

For Kenmore Elite model 72167909600, “size” usually means the exterior dimensions (W x H x D) and the oven capacity (cubic feet). Use the model’s spec section in the 72167909600 owner's manual to get the exact measurements for your countertop space.

What “size” includes

When comparing Kenmore Elite countertop microwaves, we recommend checking these specs first:

• Exterior dimensions: width, height, and depth (often listed as W x H x D)
• Depth details: whether depth is measured with the door closed, and whether it includes the handle/trim
• Oven capacity: interior cavity volume in cubic feet
• Clearance needs: space around the cabinet for airflow
• Turntable clearance: usable interior width for larger dishes

How to confirm the exact size for model 72167909600

Use the manual’s “Specifications” section, then verify with a quick tape measure check of your space.

• Find “Specifications” or “Product dimensions” in the manual
• Compare the listed width to your available countertop opening (especially under cabinets)
• Plan extra room behind and on the sides for ventilation
• If you are replacing a tray or rack, match parts by model, for example the microwave glass turntable tray MJS65336701

Typical planning ranges (countertop microwaves)

These ranges help you plan space before you confirm the exact spec page for 72167909600.

Spec you are checking	Typical range for countertop units	What to watch for
Width	20 to 24 in.	Under-cabinet clearance is the common limiter
Height	12 to 15 in.	Feet and top venting can change fit
Depth	16 to 20 in.	Often deeper when you include the door front
Capacity	1.1 to 2.2 cu. ft.	Capacity does not always track exterior size

Why it matters

Correct sizing prevents blocked vents (overheating), door swing clearance problems, and a poor countertop fit. It also helps you choose compatible accessories and replacement parts for your Kenmore Elite microwave.

Last updated: January 2026

The cubic-feet capacity for Kenmore Elite model 72167909600 is listed in the specifications section of the product literature for that exact model. The most reliable way to confirm it is to check the spec page in the 72167909600 owner's manual.

Where to find the capacity (fastest checks)

Look for these labels in the documentation and on the unit:

• “Capacity”, “Oven capacity”, or “Cavity volume” in the specifications table
• The model and serial tag (usually inside the door opening or on the back panel)
• Any “Tech data” or “Specifications” page near the back of the manual
• The parts diagram notes (sometimes list cavity size for matching trays and racks)

Typical capacity range for this style of microwave

Most Kenmore countertop microwaves in this family fall into a common range; use this to sanity-check what you see in the manual.

Countertop microwave class	Typical capacity (cu. ft.)	Common use
Compact	0.7 to 1.1	Small plates, mugs
Mid-size	1.2 to 1.6	Dinner plates, medium casseroles
Full-size	1.7 to 2.2	Larger cookware, family portions

Why it matters

Capacity affects what fits on the turntable and how easily dishes rotate without hitting the walls. It also helps you choose correctly sized accessories and compare similar Kenmore Elite models accurately.

Parts that relate to usable interior space

If your goal is fit or rotation (not just the published capacity), these parts commonly affect real-world usability:

• Microwave glass turntable tray MJS65336701 (correct tray diameter and seating)
• Microwave turntable motor coupler 4370W3A001A (tray alignment and drive)
• Microwave turntable motor 6549W1S013A (tray rotation)

Last updated: January 2026