Samsung NX60A6311SG/AA-01 gas range Parts

A bad oven igniter on your Samsung NX60A6311SG gas range usually shows up as an oven that will not heat, takes a long time to preheat, or clicks without the bake burner lighting. If the igniter glows but the burner does not light within about 60 to 90 seconds, the igniter is weak and should be replaced (use the owner's manual for model-specific checks and safety steps).

• Oven will not start heating in Bake (no flame)
• Very slow preheat, then temperature swings during cooking
• You smell gas briefly but the burner does not light (stop and ventilate)
• Igniter does not glow at all when Bake is selected
• Igniter glows dull orange instead of bright yellow-white
• Burner lights only sometimes, especially when the oven is cold

1. Confirm the basics: Make sure the range has power (clock/display on) and the gas supply valve is on.
2. Watch the start sequence: Set Bake and look through the oven bottom openings (do not disassemble while powered). You should see the igniter glow first, then the burner should light.
3. Time the ignition: If glow happens but ignition is consistently slow (about 60 to 90 seconds or longer), the igniter is not drawing enough current to open the gas valve reliably.
4. Inspect for damage: After the oven is cool and power is off, look for cracks, white spots, or a burned connector at the igniter leads.

A weak igniter can prevent the bake burner from lighting consistently, causing long preheats and uneven baking. It can also lead to repeated ignition attempts that stress related components like the gas valve and control system.

Last updated: February 2026

Yes. The Samsung NX60A6311SG gas range includes a self-cleaning oven mode (high-heat “Self Clean”) and it also offers a shorter “Steam Clean” option for lighter messes; use the NX60A6311SG owner's manual to confirm the exact cycle options and run times for your unit.

Self Clean uses very high heat to burn off baked-on grease and food residue; Steam Clean uses moisture and lower heat to loosen light spills for faster wipe-out.

• Remove oven racks, pans, foil, and any cookware (unless your manual says a rack is safe to leave in).
• Wipe up excess spills first; thick pools of grease can smoke.
• Make sure the kitchen is ventilated (use the range hood if you have one).
• Keep the oven door closed and do not interrupt the cycle unless the manual instructs you to.
• Let the oven cool completely before wiping out residue.

Using the right cycle helps protect oven finishes and reduces smoke and odors. Steam Clean is ideal for routine maintenance, while Self Clean is the right choice when normal wiping will not remove carbonized buildup.

Last updated: February 2026

If your Samsung NX60A6311SG gas range is not emitting gas, the most common causes are a closed gas shutoff valve, a kinked supply line, or a burner that is clogged or not seated correctly. Start with the gas supply checks, then move to burner cleaning and ignition checks using the owner's manual.

• Turn all burner knobs to OFF.
• Ventilate the kitchen; open a window if you smell gas.
• Do not use an open flame to test for gas.
• If you smell gas continuously, stop and contact Sears PartsDirect support or a qualified technician.

• Confirm the house shutoff valve (usually behind the range) is fully open.
• Make sure the range is plugged in; many gas ranges need power for the spark ignition and gas valve controls.
• Check that burner caps and heads are seated flat and aligned.
• Clean clogged burner ports; grease and boil-overs can block gas flow.
• Try a different surface burner to see if the issue is one burner or all burners.

If gas supply is confirmed on and burners are clean/seated, an ignition or control component can prevent lighting or proper gas delivery.

Common related parts for this model include:

• Range surface burner igniter DG94-00541A (ignition at the burner)
• Range spark module DG96-00297A (creates spark to the electrodes)
• Assy switch ignition DG96-00838A (switching that triggers sparking)
• Range gas control valve DG94-03446A (gas routing/control; service is typically technician-level)

A “no gas” symptom can be as simple as a closed shutoff valve or a dirty burner, but it can also point to an ignition failure that leaves unburned gas present. Systematic checks protect your home and help you replace only the part that actually failed.

Last updated: February 2026

The Samsung NX60A6311SG gas range uses standard household power for the controls and ignition: 120 volts AC at 60 Hz on a dedicated 20-amp, properly grounded circuit. Confirm the exact outlet and grounding requirements in the NX60A6311SG owner's manual.

• Voltage and frequency: 120 VAC, 60 Hz
• Circuit: Dedicated 20-amp branch circuit
• Grounding: Properly grounded receptacle (no adapters)
• Cord use: Plug directly into the wall outlet (no extension cords)
• What electricity runs: Display/control board, oven light, and spark ignition

• Check the breaker is on and the outlet has power.
• Reseat the plug; make sure it is fully inserted.
• If the cooktop will not spark but the outlet is good, inspect ignition components such as the range spark module DG96-00297A.
• If the display is dead or unresponsive, a failed control may be involved, such as the Samsung range oven control board DG94-04041C.

A gas range still needs stable 120-volt power to run the safety and control system. Using the correct 20-amp grounded circuit helps prevent ignition failures, error codes, and intermittent operation.

Last updated: February 2026