Kenmore 10650049717 refrigerator Parts

For Kenmore Coldspot side-by-side refrigerator model 10650049717, use the product dimensions section in the 10650049717 owner's manual for the exact height, width, and depth. For planning purposes, most Kenmore 106 side-by-side units are roughly 66 to 71 inches tall and 30 to 34 inches deep (without handles).

How to get the exact measurements (recommended)

We use these checks to avoid surprises with cabinet openings, door swing, and moving the refrigerator through doorways.

• Check the dimensions/specifications pages in the 10650049717 owner's manual
• Measure your unit at the widest and deepest points (hinges and handles often add depth)
• Measure with doors closed and then confirm door swing clearance next to a wall
• Compare your measurements to the kitchen cutout (width, height, and depth)
• Plan for ventilation space so the refrigerator cools efficiently

Installation clearance guidelines (from the manual)

The Kenmore manual calls for these minimum clearances for ventilation and door swing:

• 1/2 inch of space on each side and at the top
• 2 inches of space behind the refrigerator
• At least 2 inches on the hinge side when installed next to a fixed wall (door swing clearance varies by setup)

Quick planning table (typical side-by-side ranges)

Use this only as a rough fit check; confirm exact specs in the manual.

What you are checking	Typical range for side-by-side refrigerators	Why it matters
Height	66 to 71 in.	Fits under cabinets and through doorways
Depth (no handle)	30 to 34 in.	Prevents sticking out past counters
Clearance behind	2 in.	Airflow and cooling performance

Why it matters

Correct sizing prevents poor airflow, warm temperatures, and doors that cannot open fully against a wall. It also helps you plan water line routing if your 10650049717 has an ice maker.

If you are ordering replacement parts while you plan the install, you can shop model-matched parts on the list for 10650049717 or search by model on Sears PartsDirect.

Last updated: February 2026

You can find the model number for your Kenmore refrigerator on the model and serial label, which is typically inside the fresh food (refrigerator) compartment on a side wall or ceiling area. For Kenmore model 10650049717, the exact label location and what it looks like are shown in the owner's manual.

Common places to check on Kenmore side-by-side refrigerators

Look in these spots first (use a flashlight and wipe away any condensation or dust):

• Inside the refrigerator compartment on the left or right side wall
• On the ceiling of the refrigerator compartment near the light housing
• Behind or beside the crisper drawers (sometimes on the wall behind the lower drawers)
• On the inside edge of the refrigerator door (hinge side)
• Behind the base grille or near the kickplate area at the bottom front

How to read the label correctly

Once you find the tag, copy the information exactly as printed.

• Model number: the full identifier (example: 10650049717)
• Serial number: used to identify production date and revision
• Color code or suffix: may appear after the model family (common on Kenmore 106 models)

Quick check table

What you need	What it’s used for	Why it matters
Model number	Parts lookup and diagrams	Ensures the part fits your exact configuration
Serial number	Version and production run	Helps match updated parts when designs change
Product type	Troubleshooting steps	Confirms you are following the right procedure

Why it matters

Kenmore 106 model refrigerators often have multiple variations that look similar. Using the exact model number from the label helps us match the correct parts (like a door switch, ice maker, or water filter housing) and the right repair instructions.

If you are ordering parts after you locate the model number, you can also search by model on Sears PartsDirect.

Last updated: February 2026

Water leaks on a Kenmore 10650049717 side-by-side refrigerator usually come from a clogged defrost drain overflowing, a loose water-line connection at the back, or dripping at the dispenser from air in the lines after a new filter or installation. Use the owner's manual to match the symptom to the right fix.

Pinpoint the leak location first

Check these common spots before replacing parts:

• Front dispenser area: a few after-drops are normal; steady dripping points to air in lines or ice melting in the chute
• Behind the refrigerator: water line fittings not fully tightened
• Under the freezer side or front floor: defrost drain backed up and spilling
• Inside fresh food section: water line or reservoir seep, depending on puddle location

Fixes that solve most leaks

Dispenser dripping

The manual notes a few drops after dispensing are normal. For ongoing dripping:

• Hold the glass under the dispenser 2 to 3 seconds after releasing the lever
• Dispense several glasses to purge air in the water lines after a filter change
• Clear ice shavings in the chute so meltwater does not mimic a leak

Water leaking from the back

• Pull the unit out and inspect the household shutoff and inlet connection
• Tighten fittings firmly (avoid overtightening plastic)
• Dry the area, then recheck for fresh moisture

Clogged defrost drain

• Unplug the refrigerator
• Melt visible ice near the drain opening
• Clear debris so water flows to the drain pan underneath

Quick comparison

Where you see water	Most likely cause	Best first step
Dispenser area	Air in lines or after-drip	Flush water system; hold cup 2 to 3 seconds
Back of unit	Loose connection	Tighten fittings; recheck
Freezer side floor	Defrost drain clog	Clear drain; confirm pan flow

Parts that can help when tubing or filter connections leak

• Refrigerator water tube W10823511 for cracked or leaking water tubing
• Refrigerator housing assembly W11162041 for leaks around the water filter housing

Why it matters

Stopping the leak prevents floor damage and reduces ice buildup that can interfere with airflow and cooling.

For replacement parts for model 10650049717, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026