Craftsman 706597862 tool box Parts

On a Craftsman tool chest like model 706597862, the model number is typically on a paper label or metal tag inside the cabinet, most often on the back panel behind the drawers or on an inside side wall near the top. Check the areas around the lock and drawer slides as well.

• Inside the cabinet on the rear panel (often behind the drawers)
• Inside the cabinet on a side wall near the top or bottom
• On the front frame/upright just inside the drawer opening
• Near the lock cylinder or latch area
• On the back exterior of the chest (less common)

1. Pull out the top drawers and use a flashlight to look at the back wall.
2. Look for a white/silver sticker, or a stamped number in the metal.
3. Check both upper corners and the area near the lock.
4. If the drawers do not lift out easily, open them fully and look along the inner side rails.

We use the model number to match the correct tool storage parts (like drawer slides, locks, casters, and handles) because similar-looking Craftsman chests can use different hardware.

For tips on confirming you have the right model number before ordering, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026

If you do not need a full-size tool chest for your Craftsman 706597862 tool box setup, several storage options can organize tools just as well; the best choice depends on whether you need portability, wall storage, or fast access at a workbench.

• Tool bag: best for carrying hand tools to jobsites; quick grab-and-go.
• Tool backpack: better weight distribution than a bag; good for stairs and ladders.
• Rolling tool cart: mobile storage for a garage or shop; keeps tools near the work area.
• Pegboard with hooks: wall-mounted visibility; great for frequently used tools.
• Magnetic tool strip or rail: fast access for metal tools (screwdrivers, pliers, wrenches).
• Drawer organizers and foam inserts: best if you already have drawers but want better layout.
• Small parts organizers (tackle-box style): ideal for screws, bits, terminals, and fittings.

• If you travel with tools, prioritize tool bags/backpacks with reinforced bottoms and many pockets.
• If you work in one spot, prioritize pegboard plus a small parts organizer for hardware.
• If you move around a garage bay, a rolling tool cart keeps tools accessible without constant trips.
• If you lose small items, add drawer dividers or foam cutouts to create dedicated slots.

The right alternative reduces time spent searching for tools, prevents damage (especially to precision tools), and improves safety by keeping sharp or heavy items secured.

For more help identifying the exact model number when shopping for compatible storage accessories or replacement items, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026

Craftsman tool boxes, including the Craftsman 706597862 tool chest (commonly sold as a 7-drawer chest), are made for the Craftsman brand owned by Stanley Black & Decker. The exact factory and country of origin vary by product line; the ID label on your chest lists the specific origin for your unit.

Craftsman is a brand; tool chests are produced under the brand owner’s manufacturing and sourcing programs, which can change by series, size, and price tier.

• Brand owner: Stanley Black & Decker (Craftsman)
• Manufacturing can differ by product line and production run
• Components such as drawer slides, casters, locks, and fasteners are often globally sourced
• The most reliable identifier is the country-of-origin statement on the chest label or carton

Use the model and the product identification label to tie your tool chest to its specific production details.

• Match the model number exactly: 706597862
• Check inside the top drawer, inside a lower drawer, or on the back panel
• Look for wording like “Made in …” or “Country of origin”
• Record any date code, factory code, or additional ID numbers on the label

Knowing the maker and origin helps when you are matching replacement hardware (locks/keys, slides, casters) and comparing build details like drawer capacity and steel thickness across different Craftsman tool storage lines.

For locating and using the model and ID information for parts lookups, use: how to find your appliance model number (and what it means for parts).

Last updated: February 2026

Many Craftsman tool boxes and tool chests are sold with a limited lifetime warranty, but the exact coverage is tied to the specific product and the failed component. For Craftsman tool chest model 706597862, use your receipt and the warranty statement that came with the chest to confirm the term and exclusions.

On tool chests, “lifetime” coverage is written around defects in materials or workmanship under normal use. It is not written to cover every kind of damage.

Typical covered items:

• Drawer slide defects or premature failure under normal loading
• Structural defects (cabinet body, drawer box, welds)
• Handle or latch defects from normal operation

Typical exclusions:

• Cosmetic wear (scratches, dents, finish wear)
• Rust or corrosion from moisture exposure
• Overloaded drawers, impacts, tip-overs, or modifications
• Lost keys or lockouts (unless the lock mechanism itself is defective)

Use this process to match the warranty terms to your exact chest.

• Locate the model and serial label (commonly inside a drawer, on the back, or inside the cabinet)
• Verify the label shows 706597862
• Find the warranty card or paperwork that came with the chest (or the warranty text on the packaging)
• Match the failed item to the warranty wording (slides, casters, lock, lid, drawer, frame)
• Keep proof of purchase; it is required for warranty service

Tool chests most often fail at drawer slides, casters, and locks. Confirming the exact warranty language for 706597862 tells you whether to pursue warranty service or plan a repair.

For help locating the model label and confirming the number format, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026

Yes. On the Craftsman tool chest model 706597862, the drawers are removable; the exact release method depends on the slide style installed in your chest. In most cases, you fully extend the drawer, release the slide locks or stops on both sides, then pull the drawer straight out while supporting it.

• Empty the drawer completely so weight does not bind the slides.
• Pull the drawer out until it hits the stop.
• Inspect both slide rails near the front for release levers, tabs, or a stop screw.
• If you see levers or tabs: hold both releases at the same time, then pull the drawer straight out.
• If you see a stop screw or small stop bracket: remove the stop hardware, then slide the drawer out.
• Support the drawer as it clears the cabinet so the slide members do not twist.

• Remove the heaviest bottom drawers first to reduce tipping risk.
• Keep the cabinet upright; twisting the frame can misalign the drawer tracks.
• Roll slowly over seams and thresholds to avoid bending slide rails.
• Reinstall drawers one at a time and confirm smooth travel before reloading tools.

Using the correct release method prevents bent slides, stuck drawers, and cabinet racking, especially when you are removing drawers to lighten the tool chest for transport.

For help confirming you are working with the correct model before ordering replacement slides or hardware, use how to find your appliance model number (and what it means for parts).

Last updated: February 2026