What do Kenmore model numbers look like?
Kenmore model numbers typically start with a 3-digit prefix that identifies the original manufacturer, followed by digits that define the base model and its variations. For Kenmore refrigerator model 1064641173713, the 106 prefix indicates a Whirlpool-built design; use the full model number when matching parts and manuals.
How to read a Kenmore model number
Most Kenmore appliance model numbers follow a predictable pattern that helps us match the correct parts list, diagrams, and service information.
- First 3 digits: manufacturer prefix (for example, 106)
- Next digits: base model series (design family)
- Remaining digits: feature set, color, and production variations
- Full model number matters: small digit changes can mean different shelves, gaskets, or electronics
- Use the model tag: confirm the number from the refrigerator’s rating label, not just the door badge
Why the prefix matters when ordering parts
The prefix helps narrow down which design standards and part families your refrigerator uses. That is especially important for common repairs like door sealing, lighting, and defrost issues.
| What you have | What it tells us | Why it matters |
|---|---|---|
| 3-digit prefix (example: 106) | Who built the Kenmore unit | Points to the right part families and diagrams |
| Full model number (1064641173713) | Exact configuration | Ensures correct fit for bins, gaskets, and controls |
| Manual match | Operating and care details | Confirms features and maintenance steps |
Where to find the model number on the refrigerator
We recommend checking the rating label inside the fresh food compartment (often on a side wall near the crisper area) and copying the model number exactly.
- Write it down exactly as shown (include all digits)
- Take a clear photo for reference
- Use that exact number when searching parts for this refrigerator
Why it matters
Using the full Kenmore model number prevents ordering the wrong door gasket, door bin, or electrical component. It also ensures you are following the correct care and troubleshooting steps for your specific side-by-side design.
For model-specific identification details and care information, use the 1064641173713 owner's manual. For parts lookup by model number beyond this parts list, use Sears PartsDirect.
Last updated: February 2026
Where is the model number on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 1064641173713, the model number is printed on the appliance identification label inside the refrigerator compartment. We use that model number to match the correct parts list, diagrams, and the right replacement parts for your exact unit.
Common places to check
Look for a paper or foil label in one of these spots:
- Inside the fresh food section on a side wall (often near the top)
- On the ceiling of the fresh food compartment near the light housing
- On the frame around the fresh food door opening (hinge side)
- Behind the base grille area (less common, but worth a quick check)
- On the back exterior panel (usually easiest to see with a flashlight)
For model-specific label locations and illustrations, use the owner's manual.
Tips to read the label correctly
The label usually shows both a model and a serial number. To avoid ordering the wrong Kenmore parts, use these quick checks:
- Write down the full model number exactly as shown (include all digits)
- Do not use numbers from the ice maker, water filter, or compressor tag
- Take a clear photo before the label gets worn or smeared
- If the label is hard to read, use a flashlight and wipe dust gently with a dry cloth
Why it matters
Kenmore 106-series refrigerators can look similar across multiple model numbers, but parts like door gaskets, LED lights, and evaporator fan components can vary by revision. Using the exact model number helps us match the correct diagrams and avoid returns.
| What you find | What it’s used for | Example |
|---|---|---|
| Model number | Selecting the correct parts and diagrams | 1064641173713 |
| Serial number | Identifying production run details | Varies by unit |
If you’re ordering parts
Once you have the model number, order from the parts list for model 1064641173713, or search by model on Sears PartsDirect.
Last updated: February 2026
What are the most common problems with Kenmore refrigerators?
The most common problems we see on Kenmore side-by-side refrigerators like model 1064641173713 are cooling issues (often airflow or defrost related), water leaks, ice maker and dispenser troubles, and unusual noises. Many of these start with basic maintenance and a few high-wear parts.
Most common symptoms and what usually causes them
- Not cooling or weak cooling: dirty condenser coils, blocked vents, evaporator fan not running, or frost buildup from a defrost problem
- Freezer cold but fresh food warm: restricted airflow, iced-over evaporator cover, or a failing evaporator fan motor
- Water leaking or puddles: clogged defrost drain, loose water line, or door not sealing
- Ice maker not making ice: water supply issue, frozen fill tube, or dispenser/ice maker component problem
- Noises (buzzing, rattling, clicking): fan blade rubbing ice, fan motor wear, or normal longer run times on energy-efficient compressors
Quick checks we recommend first (safe, no tools)
- Confirm the refrigerator is plugged into a grounded 3-prong outlet and avoid extension cords (see the safety section in the owner's manual).
- After a new install or power loss, allow 24 hours for temperatures to stabilize.
- Set temperatures back to normal if they were turned to “coldest”; it does not cool faster.
- Make sure doors close fully and nothing blocks interior air vents.
- Listen for the evaporator fan; if it is silent with the door closed, airflow is likely the issue.
Parts that commonly solve these problems on this model
If troubleshooting points to a failed component, these are common fixes for model 1064641173713:
| Problem area | Common fix | Example part on this model |
|---|---|---|
| Frost buildup, warm temps | Defrost system repair | Refrigerator heater WP2323198 |
| Warm fresh food section | Restore airflow | Refrigerator evaporator fan motor WP2315549 |
| Rattling or fan noise | Replace damaged blade | Refrigerator evaporator fan blade WP2169142 |
| Door not sealing, sweating | Replace gasket | Door gasket (match color/door) |
Why it matters
Cooling, leaks, and noise problems usually trace back to airflow and defrost performance. Catching a weak fan, iced evaporator, or poor door seal early helps prevent food spoilage and reduces compressor run time.
Last updated: February 2026
How many cubic feet is my Kenmore refrigerator by model number?
Your Kenmore side-by-side refrigerator model 1064641173713 has its exact cubic-foot capacity listed on the model’s rating information (often inside the fresh food compartment) and in the specifications section of the owner's manual. Use the model number to match the correct spec line.
Where to find the cubic-foot capacity
Check these common places on Kenmore 106 side-by-side refrigerators:
- Inside the refrigerator compartment on the rating label (often on a side wall near the crisper area)
- Inside the freezer compartment on a similar rating label (varies by design)
- In the specifications section of the owner's manual
- On the product identification label near the door hinge area (some installations)
Quick way to confirm you are reading the right label
Many labels show multiple values. Use this checklist so you capture the correct capacity:
- Look for wording like “Capacity”, “Total volume”, or “Cu. Ft.”
- Note whether it lists total, refrigerator, and freezer capacities separately
- Record the full model number exactly as shown (for example, 106.4113* and 106.4117* are model families referenced in the manual)
- If a color code is shown (the “*” in the manual), ignore it for capacity and focus on the base model family
Typical capacity range (helpful for a sanity check)
Most Kenmore 106 side-by-side refrigerators are commonly in this range:
| Capacity type | Typical range |
|---|---|
| Total capacity | 22 to 26 cu. ft. |
| Freezer capacity | 7 to 9 cu. ft. |
| Refrigerator capacity | 14 to 17 cu. ft. |
Why it matters
Cubic-foot capacity helps you choose correctly sized replacement items (like door bins and crisper pans), plan food storage, and estimate how much dry ice you would need during an outage (the manual references dry ice amounts per cubic foot of freezer space).
If you are ordering storage parts, match by model first; for example, a damaged bin or pan can be replaced with parts like the refrigerator door bin W11174793 or refrigerator crisper pan W11174619 when those match your layout.
Last updated: February 2026
How wide is a Kenmore side-by-side refrigerator?
For Kenmore side-by-side refrigerator model 1064641173713, plan for a 36-inch minimum cabinet cutout width for installation. The use and care guide also calls for clearances around the cabinet for ventilation and door swing; confirm your exact opening and clearance needs in the 1064641173713 owner's manual.
What the manual says to plan for
The installation planning guidance in the manual includes these key width and clearance targets:
- Minimum cabinet cutout width: 36 in (91.44 cm)
- Side and top ventilation space: 1/2 in (12.7 mm) each side and at the top
- Rear clearance: 2 in (50.8 mm) behind the refrigerator
- Door swing next to a wall: leave 2 in (50.8 mm) minimum on each side (depending on your setup)
Quick sizing table
| What you are measuring | Use this number | Why it matters |
|---|---|---|
| Cabinet opening between cabinets | 36 in minimum | Ensures the cabinet fits into the space |
| Space above and on each side | 1/2 in | Maintains airflow and efficiency |
| Space behind the refrigerator | 2 in | Prevents pinched lines and improves ventilation |
Why it matters
Correct width and clearance prevent doors from binding against a wall, help drawers and bins slide out fully, and keep airflow moving so the compressor and evaporator system can cool efficiently.
Related tip while you are measuring
If the refrigerator ends up tight in the opening, a worn or warped door seal can also make doors feel “too wide” because it drags or catches. Our how to fix a fridge door seal guide walks through common fixes; if you need a replacement, match the gasket by model and color (for example, door gasket (black) 2159083 or gasket, door (beige) 2159075).
You can order replacement parts from the parts list for model 1064641173713, or search by model number on Sears PartsDirect.
Last updated: February 2026





