Kenmore Elite 79551829411 refrigerator Parts

A Kenmore Elite side-by-side refrigerator like model 79551829411 typically lasts 10 to 15 years under normal household use. Keeping the condenser area clean, maintaining good door seals, and staying on top of water and ice system maintenance helps you reach the upper end of that range; see the 79551829411 owner's manual for care and troubleshooting guidance.

Typical lifespan and what affects it

Most refrigerators in this class land in the 10 to 15 year window. The biggest factors that shorten life are heat buildup (dirty condenser), air leaks (worn gaskets), and heavy use of the ice maker and dispenser.

• Clean dust from the condenser area regularly to reduce compressor run time
• Keep doors closing squarely; fix sagging hinges and misalignment
• Replace the water filter on schedule to protect the inlet valve and reservoir
• Avoid overpacking; blocked vents cause warm spots and longer run times
• Address unusual noises early (fan motor, damper, or ice maker issues)

Quick “repair vs. replace” rule of thumb

If your 79551829411 is over 10 years old and needs a major sealed-system or control repair, it often makes sense to compare repair cost to replacement value.

Situation	What it usually means	Common next step
Warm fridge/freezer, long run times	Airflow or heat rejection problem	Clean condenser; check evaporator fan
Water/ice issues only	Often a filter, valve, or dispenser component	Start with filter and water supply checks
Repeated temperature swings	Sensor/control or airflow issue	Check sensor readings and fan operation

Parts that commonly impact longevity on this model

These are examples of parts on this model that can affect performance when they wear out:

• Refrigerator water filter 9490 ADQ73613402 (clogging can reduce flow and strain water components)
• Refrigerator water inlet valve AJU34125552 (weak valve can cause slow fill or no ice)
• Refrigerator freezer evaporator fan motor EAU62064602 (failed fan can cause poor cooling)
• Lg refrigerator electronic control board EBR78748202 (control issues can cause erratic operation)

Why it matters

Knowing the expected lifespan helps you plan: routine maintenance can prevent expensive failures, and age plus symptom severity helps you decide whether a repair is a smart investment.

Last updated: February 2026

Yes. We still offer replacement parts for Kenmore refrigerators, including model 79551829411. You can match parts by model number and symptoms, then order common items like water filters, door gaskets, ice maker parts, and water valves to restore cooling, ice, and water performance.

Best way to find the right part for model 79551829411

We recommend starting with the model-specific diagrams and part list, then confirming the part by location and description.

• Use the model number 79551829411 to ensure fit
• Identify the system you are repairing (water/ice, doors, cooling, controls)
• Compare the part name and part ID before ordering
• Check whether the issue is maintenance (filter) or a repair (valve, fan motor)
• Use the troubleshooting steps in the owner's manual to narrow the cause

Common parts customers replace on this Kenmore Elite side-by-side

These are frequently needed parts for water, ice, and temperature complaints:

Symptom	Common part to check	Example part for this model
Slow water flow, bad taste/odor	Water filter	Kenmore refrigerator water filter 9490 ADQ73613402
No ice or small cubes	Ice maker assembly, inlet valve	Refrigerator ice maker assembly (model-specific)
Water dispenser not working	Water inlet valve, reservoir, fittings	Refrigerator water inlet valve AJU34125552
Warm freezer or fridge, fan noise	Evaporator fan motor, sensor	Refrigerator freezer evaporator fan motor EAU62064602
Door not sealing, frost buildup	Door gasket	LG refrigerator door gasket (model-specific)

Why it matters

Using the correct Kenmore model number and the exact part ID prevents fit issues and repeat failures. For example, a clogged filter can mimic a weak inlet valve; confirming the cause first saves time and helps restore proper ice maker and dispenser operation.

Helpful DIY guidance

If you are replacing a filter or troubleshooting water flow, we recommend following a Kenmore-specific walkthrough such as how to replace the water filter in a Kenmore refrigerator.

Last updated: February 2026

Common issues on the Kenmore 79551829411 Elite refrigerator include warm temperatures from blocked airflow or long door openings, frost or moisture buildup, unusual fan or compressor noise, and water or ice dispenser problems (often tied to the water supply, filter, or inlet valve). Our owner's manual troubleshooting guide covers the most frequent symptoms and checks.

Most common symptoms and what usually causes them

• Refrigerator or freezer too warm: blocked air vents, frequent door openings, hot food load, or the unit operating in a hot location.
• Food freezing in fresh food section: items placed near an air vent, or temperature set too cold.
• Frost or ice buildup: door not sealing well, doors opened often, or airflow restrictions.
• Water leaks or puddles: a restricted defrost drain path or drain tube.
• Weak water flow or no ice: restricted filter, low water pressure, or a failing inlet valve.
• Loud humming, buzzing, or fan noise: evaporator fan issues, condenser area airflow problems, or compressor-related noise.

Quick checks we recommend first (no tools)

1. Confirm doors close fully and nothing blocks the door from sealing.
2. Make sure packages are not blocking interior air vents.
3. Reduce long door openings; allow up to 24 hours after installation or major loading for temperatures to stabilize.
4. Verify the room temperature stays within normal operating conditions (avoid very hot locations).
5. If you have dispenser issues, confirm your home water supply meets typical requirements.

Water and ice system basics (model-relevant specs)

Your refrigerator’s water system is designed around these ranges:

Item	Typical requirement
Water pressure	40 to 120 psi
Water temperature	33°F to 100°F
Minimum service flow	0.5 gpm

If pressure or flow is low, the dispenser and ice maker can act intermittent even when the refrigerator cools normally.

Parts that commonly solve the problem

Use the symptom to guide the part you check next:

Symptom	Part to consider
Bad tasting water, slow dispensing	Kenmore refrigerator water filter 9490 ADQ73613402
No water to dispenser or ice maker	Refrigerator water inlet valve AJU34125552
Water pooling from defrost drain area	Refrigerator drain tube 5251JA3003D

Why it matters

Cooling and airflow problems can quickly lead to food spoilage, while water system issues can cause leaks, low ice production, and dispenser failures. Catching blocked vents, door seal issues, and water pressure problems early prevents bigger repairs.

Last updated: February 2026

On Kenmore Elite model 79551829411, the model number is printed on the identification label inside the fresh food (refrigerator) compartment, on the interior liner. You will typically find the serial number on the same label, so you can record both for parts lookup and service.

Where to look (quick checklist)

• Open the right refrigerator door (fresh food side)
• Look along the interior liner walls of the refrigerator compartment
• Check near the upper side wall or near the crisper area where labels are commonly placed
• Find the label that lists Model and Serial
• Write the model number exactly as shown (for this unit, it is 79551829411)

What the label usually includes

Item on label	What it’s used for	Example for this unit
Model number	Matching diagrams and parts	79551829411
Serial number	Identifying production details	Varies by unit
Basic electrical info	Confirming power requirements	Varies by label

Why it matters

We use the model number to match the correct Kenmore parts and diagrams for your exact side-by-side refrigerator configuration. Even small model variations can change the correct water filter, door gasket, or control parts.

Helpful next step

If you’re locating the model number to replace a maintenance item, the owner's manual also explains where the identification label is located and how to record the model and serial number.

Last updated: February 2026

Kenmore Elite model 79551829411 is a side-by-side refrigerator (manual series 795.5182*). The exact exterior dimensions (width, depth, height) are listed in the specifications section of the 79551829411 owner's manual; use those measurements for fit, delivery clearance, and door-swing planning.

How to measure for fit (what we recommend)

Measure your space first, then compare to the refrigerator specs in the manual.

• Width: cabinet opening side-to-side at the front and back
• Height: floor to the lowest overhead cabinet or soffit
• Depth: wall to the front edge of counters (note: handles add depth)
• Door swing clearance: space needed to fully open both doors
• Ventilation clearance: space behind and above for airflow
• Pathway clearance: doorways, hallways, and turns to the kitchen

Typical size range for a 33-inch class side-by-side (helpful planning)

Many Kenmore side-by-side refrigerators in this class commonly fall in these ranges; confirm your exact numbers in the manual.

Measurement	Typical range (approx.)	Why you should still confirm
Width	32 3/4 to 36 in.	Door style and trim vary by model series
Height	66 to 71 in.	Hinges and leveling legs can change height
Depth	30 to 34 in.	Handles and door thickness affect depth

Why it matters

A refrigerator that is even 1 inch too wide or too tall can prevent proper installation, restrict airflow (cooling performance), or keep doors from opening fully. Using the model-specific specs from the 79551829411 owner's manual avoids surprises.

Related parts that can affect “depth” and door clearance

If you are troubleshooting fit issues after moving the unit, these parts are commonly involved:

• Door alignment and swing: refrigerator door hinge 4775JA2113A
• Door seal thickness and closure: lg refrigerator door gasket 4987JJ1010R
• Freezer door seal and closure: lg refrigerator freezer door gasket 4987JJ1010Q

Last updated: February 2026