Kenmore Elite 79571322411 refrigerator Parts

A Kenmore Elite refrigerator typically lasts 10 to 15 years with normal household use and basic maintenance. For the Kenmore Elite 79571322411, keeping airflow clear and temperatures stable helps you reach the high end of that range and avoid major sealed-system strain.

Typical lifespan and what to expect

Most owners see these timeframes:

• 0 to 5 years: routine items (water filter, door alignment, ice maker adjustments)
• 5 to 10 years: higher chance of fan, sensor, or ice maker wear
• 10 to 15 years: common window for major repairs (cooling system, controls)
• 15+ years: achievable with strong maintenance and fewer heavy-use conditions

Component area	What usually fails first	What you may notice
Airflow/cooling circulation	Evaporator fan motor	Warm fridge section, noisy fan, uneven temps
Temperature sensing/control	Temperature sensor or control issues	Temps swing, food freezing in fresh food section
Ice and water system	Ice maker assembly, dispenser issues	No ice, small cubes, slow dispensing
Sealed system	Compressor-related problems	Not cooling, clicking, long run times

Maintenance that extends life (high impact)

We recommend these habits for Kenmore Elite refrigerators:

• Keep condenser area clear of dust and pet hair (improves efficiency)
• Confirm door seals close tightly; avoid gaps that cause long run times
• Do not block interior vents with food packages
• Set temps to typical targets: 37°F fresh food and 0°F freezer
• Replace filters on schedule and purge air after filter changes

For model-specific care and operating guidance, follow the 79571322411 owner's manual.

Why it matters

A refrigerator that runs longer than it should (from dirty coils, poor door sealing, or blocked vents) puts extra load on the cooling system. That can shorten overall lifespan and increase the odds of expensive repairs.

Parts that commonly relate to “end-of-life” symptoms

If your refrigerator is warming, running constantly, or making new noises, these model-matched parts are often involved in diagnosis:

• Refrigerator compressor TCA38091801 (sealed-system cooling)
• Lg refrigerator evaporator fan motor 4681JB1027C (air circulation)
• Refrigerator temperature sensor 6500JB2002X (temperature feedback)

Last updated: January 2026

If your Kenmore Elite refrigerator model 79571322411 is not cooling enough, the most common causes are restricted airflow (dirty condenser coils or blocked vents), a failed evaporator fan, or a sealed-system/compressor issue. We recommend checking airflow and fans first before replacing major parts. See the 79571322411 owner's manual for control settings and airflow locations.

Quick checks we recommend first

• Confirm the temperature settings were not raised accidentally (refrigerator and freezer).
• Make sure food packages are not blocking air vents in the fresh food section or freezer.
• Clean condenser coils and the condenser fan area (unplug the refrigerator first).
• Verify the doors close fully and the gaskets seal all the way around.
• Listen for the evaporator fan in the freezer; it should run when cooling is needed.

What the symptoms usually point to

Symptom	Most likely area	What to check next
Freezer cold, fridge warm	Airflow/evaporator fan/ducting	Fan noise, frost buildup, blocked vents
Both sections warm	Compressor/start components or control	Compressor running sound, clicking, warm condenser
Temps fluctuate	Sensor or control issue	Sensor placement, error codes, reset/power cycle

Parts that commonly relate to low-cooling problems on this model

If the basic checks above do not restore normal temperatures, these model-matched parts are commonly involved:

• Lg refrigerator evaporator fan motor 4681JB1027C (no airflow from freezer to refrigerator)
• Refrigerator temperature sensor 6500JB2002X (incorrect temperature readings)
• Refrigerator electronic control board EBR77042513 (cooling logic and fan control)
• Refrigerator compressor overload protector 6750CL0001D (compressor not starting or clicking)
• Refrigerator compressor TCA38091801 (sealed-system cooling failure)

Why it matters

Low cooling can quickly lead to food spoilage and can also force the compressor to run longer than normal. Catching airflow problems early (coils, fans, vents, door sealing) often prevents more expensive repairs.

Helpful DIY guidance

For model-family troubleshooting steps and display diagnostics, use Kenmore 795 model bottom freezer refrigerator error codes.

Last updated: January 2026

Your Kenmore Elite refrigerator model 79571322411 has a total capacity of 29.9 cubic feet. You can also confirm the capacity in the specifications section of the 79571322411 owner's manual and on the model and serial tag inside the fresh food compartment.

Where to confirm the capacity on the refrigerator

Check these common locations:

• Model and serial tag inside the refrigerator compartment (often on a side wall near the crisper area)
• Specifications section of the 79571322411 owner's manual
• Product rating label area inside the cabinet (near the top or side wall)

What “29.9 cu. ft.” includes

Total cubic feet is the combined interior volume of both sections.

Capacity type	What it represents	Why it matters
Total capacity (29.9 cu. ft.)	Refrigerator plus freezer volume	Comparing overall size and storage
Fresh food capacity	Refrigerator compartment volume	Day-to-day grocery space
Freezer capacity	Freezer compartment volume	Frozen food and ice storage

Why it matters

Knowing the exact 29.9 cu. ft. capacity helps when you are comparing replacement refrigerators, planning kitchen fit, and setting expectations for usable storage (shelves, drawers, and ice bin space can change how roomy it feels).

Related help for this Kenmore 795-series refrigerator

If you are troubleshooting cooling or dispenser features that affect usable space, these resources help:

• Kenmore 795 model bottom freezer refrigerator error codes
• How to replace the water filter in a Kenmore refrigerator

Last updated: January 2026