Amana AGR4230BAW5 gas range Parts

Amana is a solid, value-focused brand for gas ranges; for everyday cooking, models like Amana AGR4230BAW5 are typically chosen for straightforward features, simple controls, and reasonable ownership costs. If you want premium performance or advanced features, you may prefer a higher-end line, but Amana is a dependable “basics done well” option.

• Affordable repairs: Common wear items (like igniters and door seals) are widely available.
• Simple operation: Fewer electronics usually means fewer complex failures.
• Good for daily cooking: Baking, broiling, and standard burner use are the sweet spot.
• Best fit for rentals and busy households: Practical features over luxury extras.
• Maintenance matters: Burner cleaning and proper flame setup make a big difference.

A “good” range is the one that matches how you cook and how much you want to spend over time. With an Amana range like AGR4230BAW5, keeping key components in good shape helps it stay reliable and heat consistently.

If your oven won’t heat, heats slowly, or the door leaks heat, these common parts are worth checking first:

• Igniter, hot surface W11590294 (a weak igniter is a frequent cause of no-heat or delayed ignition)
• Oven seal WPW10535778 (a worn seal can cause heat loss and uneven baking)
• Oven burner W11220387 (damage or clogging can affect ignition and flame quality)

Last updated: February 2026

If your Amana AGR4230BAW5 gas range oven is not getting hot, the most common cause is a weak hot surface igniter that glows but does not pull enough current to open the gas valve fully. A dirty burner, restricted gas flow, or a control/valve issue can also prevent proper heating.

• Confirm the oven is set to Bake (not Broil) and the temperature is above 300°F.
• Look through the oven bottom vents: the igniter should glow bright before the burner lights.
• If the igniter glows a long time (30 to 90 seconds) and the burner never lights, suspect the igniter.
• If the burner lights but the flame is weak or uneven, suspect a dirty burner or airflow issue.
• If you smell gas without ignition, stop and have the range serviced.

For AGR4230BAW5, these parts are frequent culprits when the oven will not reach temperature:

On many Amana gas ranges, the igniter does two jobs: it heats up to ignite the gas and it draws enough electrical current to allow the gas valve to open fully. When it gets weak with age, the oven may never light or may heat very slowly.

1. Place an oven thermometer in the center of the oven.
2. Set Bake to 350°F.
3. After 20 to 30 minutes, check the reading.

• If the oven is more than about 25°F off and the burner cycles strangely, the heating system needs attention.

• Turn off power at the breaker before accessing wiring.
• Shut off the gas supply valve before replacing gas components.
• Use a multimeter for electrical checks; see how to use a multimeter to test electrical parts video.

Last updated: February 2026

On the Amana AGR4230BAW5 gas range, an oven that will not ignite is usually caused by a weak hot surface igniter, a problem in the gas safety valve circuit, or a burner/airflow issue. In most cases, replacing the igniter, hot surface W11590294 restores reliable oven ignition.

• Confirm the range has power (the igniter needs electricity even though the oven uses gas).
• Set Bake and watch through the oven bottom vents: the igniter should glow bright within 30 to 90 seconds.
• If the igniter glows but the burner never lights, the igniter is typically too weak to open the gas valve.
• If the igniter does not glow at all, check for a loose wire connection or a failed igniter.
• If the burner lights but goes out or heats unevenly, inspect the burner for debris and poor flame carryover.

1. Unplug the range or switch off the breaker.
2. Shut off the gas supply valve.
3. Access the igniter and inspect for cracks, white spots, or damaged wiring.
4. If you have a multimeter, check the igniter for continuity (an open circuit indicates failure).
5. Replace the igniter using the correct model-compatible part.

A weak igniter can prevent the gas safety valve from opening, so the oven never lights. In other cases, delayed ignition can cause uneven heating and flare-ups, so restoring proper ignition improves both performance and safe operation.

Last updated: February 2026

Amana gas ranges (including model AGR4230BAW5) are made by Whirlpool Corporation, which owns the Amana brand and manufactures Amana-branded cooking appliances.

Because Whirlpool is the manufacturer behind Amana ranges, many replacement parts and design conventions are shared across Whirlpool-family brands. When ordering parts, always match by model number AGR4230BAW5 and the specific part ID.

• Use the full model number from the rating label when searching parts.
• Match the part ID first, then confirm the part name fits your symptom.
• Expect common Whirlpool-style components such as hot surface igniters, oven door seals, and gas control components.
• If your oven will not heat, the igniter and burner system are common starting points.

Knowing Whirlpool makes Amana ranges helps you troubleshoot smarter and order the right replacement parts for AGR4230BAW5. Many failures trace back to a few high-wear items (ignition, seals, burner components), so starting with the most common parts saves time and repeat repairs.

Last updated: February 2026

Resetting an Amana oven on model AGR4230BAW5 usually means power-cycling the range to clear a control glitch: turn the range off, cut power at the breaker for 1 minute, then restore power and set the clock. If the oven still will not heat, a failed ignition part is likely.

• Turn all oven and surface burner knobs to OFF.
• At your home electrical panel, switch the range breaker OFF (or unplug the cord if accessible).
• Wait 60 seconds.
• Restore power.
• Set the clock, then try Bake at 350°F.

A reset will not fix a no-heat condition caused by an ignition or gas delivery failure. On the AGR4230BAW5, these checks are the most useful:

• Watch for glow: In Bake, the hot surface igniter should glow bright within 30 to 90 seconds.
• Listen for gas ignition: You should hear a soft “whoosh” as the burner lights.
• Check broil vs bake: If Broil works but Bake does not, focus on bake ignition and burner parts.
• Inspect the oven door seal: Heat loss can mimic poor baking performance.
• Check for loose or burned wiring at the igniter and burner connections.

Resetting clears temporary electronic faults, but consistent heating problems point to a component issue (igniter, burner, gas valve, or door seal). Fixing the root cause restores safe ignition timing and stable oven temperatures.

Last updated: February 2026