Error Codes
How to reset a Frigidaire refrigerator?
For a Frigidaire FRSS2323AS8 side-by-side refrigerator, the most reliable reset is a power reset: unplug the refrigerator (or switch off the breaker) for about 5 minutes, then restore power and allow 24 hours for temperatures to fully stabilize.
- Control lock check: Make sure the controls are not locked; locked controls can look like a “frozen” panel.
- Power reset (recommended): Unplug for 5 minutes, then plug back in.
- Breaker reset: Turn the refrigerator circuit breaker OFF for 5 minutes, then ON.
- Clear alarms: If an alarm is active (door ajar, high temp), clear it on the display after closing doors.
- Filter light reset: If the “change filter” light is on after replacing the filter, reset the filter indicator on the control panel.
A reset is best for control glitches, alarms, and minor dispenser or display issues. It will not fix a mechanical cooling problem like a failed fan motor, iced-up evaporator, or a defrost failure.
| Symptom | Reset worth trying? | What to check next |
|---|---|---|
| Display not responding | Yes | Control lock, power reset, then inspect wiring/connectors |
| Not cooling in either section | Yes (first step) | Evaporator fan airflow, frost buildup, condenser cleanliness |
| Ice maker or dispenser acting up | Yes | Water supply, air in line, dispenser motor/auger issues |
| “Change filter” light stays on | Yes | Confirm correct filter and reset indicator |
If the refrigerator still will not cool correctly after a reset, these model-compatible parts are common suspects:
- Refrigerator temperature sensor 5303918775 (thermistor input to the control)
- Refrigerator defrost heater 5304526032 (helps prevent evaporator icing)
- Refrigerator evaporator fan blade 5308000010 (air movement across the evaporator)
Resetting clears temporary control logic errors and restores normal operation after a power event. If temperatures do not recover after a full day, the issue is usually airflow, defrost, or a temperature-sensing/control problem rather than a “settings” problem.
For model-specific troubleshooting steps and common fault patterns, use our Frigidaire refrigerator error codes reference.
Last updated: February 2026
What is the average life of a Frigidaire refrigerator?
Most Frigidaire refrigerators, including the FRSS2323AS8 side-by-side refrigerator, typically last 10 to 15 years with normal household use. With steady upkeep (good airflow, clean seals, and timely filter changes), it’s common to reach the upper end of that range.
A refrigerator’s life depends more on operating conditions than brand alone. The biggest factors are heat, airflow, and how hard the sealed system has to work.
- Kitchen temperature and ventilation around the cabinet
- Dirty condenser area (forces longer run times)
- Door gasket condition and door alignment
- Water quality and filter maintenance
- Power quality (surges/outages) and compressor start load
These steps reduce compressor run time and prevent common cooling and water system issues.
- Keep the toe grille area clear so air can move freely
- Clean dust from the condenser area regularly (more often with pets)
- Make sure doors close firmly; warm air leaks create frost and longer run times
- Replace the water filter on schedule using the correct filter, such as the Frigidaire refrigerator water filter FPPWFU01
- Fix puddles and drain clogs quickly to prevent ice buildup and airflow restrictions
| Item to check | What “good” looks like | What to do if it’s not |
|---|---|---|
| Door seal | Even contact all the way around | Inspect and replace if torn or warped (example: refrigerator door gasket (gray) 241786015) |
| Cooling airflow | Steady airflow, no heavy frost | Address fan/defrost issues; check how to fix your evaporator cooling fan |
| Water/ice performance | Strong flow, normal ice output | Purge air, check supply; see how to replace the water filter in a Frigidaire refrigerator |
A refrigerator that runs longer to hold temperature wears the compressor and fans faster, raises energy use, and can lead to temperature swings that spoil food sooner.
Last updated: February 2026
What is the most common problem with a Frigidaire refrigerator?
The most common issue we see on Frigidaire side-by-side refrigerators like model FRSS2323AS8 is a cooling problem (fresh food section warm, freezer too warm, or frost buildup) caused by restricted airflow, dirty condenser coils, or a failing evaporator fan or temperature sensor. Water and ice dispensing problems are a close second.
- Confirm the temperature settings are reasonable (typical targets: 37°F fresh food, 0°F freezer).
- Make sure vents inside both compartments are not blocked by food packages.
- Clean condenser coils and verify the condenser fan area is clear of dust.
- If the unit has heavy frost on the back freezer panel, plan to troubleshoot the defrost system.
- If water flow is slow or ice production drops, replace the filter and purge air from the line.
| Symptom | Most likely cause | What to do next |
|---|---|---|
| Fridge warm, freezer OK | Airflow problem in fresh food section | Check for frost/ice blockage; inspect evaporator fan operation |
| Both sections warm | Dirty coils, fan issue, sealed system problem | Clean coils first; then check fans and listen for compressor |
| Frost buildup in freezer | Defrost system not clearing ice | Inspect defrost heater and airflow path |
| Slow water, small ice cubes | Restricted water supply or clogged filter | Replace filter; verify household water pressure |
If basic airflow and coil cleaning do not fix it, these model-matched parts are common next steps:
- Refrigerator evaporator fan blade 5308000010 (fan airflow issues, noise, weak circulation)
- Refrigerator temperature sensor 5303918775 (temperature reading problems, erratic cooling)
- Refrigerator defrost heater 5304526032 (frost buildup behind freezer panel)
Water and ice issues often come down to filtration and air in the line.
- Replace the filter on schedule using Frigidaire refrigerator water filter FPPWFU01
- Follow how to replace the water filter in a Frigidaire refrigerator for correct fit and flushing steps
- Use how to purge air from a refrigerator water dispenser video if the dispenser sputters after a filter change
Cooling and airflow problems get worse over time: the compressor runs longer, food safety is harder to maintain, and frost buildup can eventually block circulation completely. Catching the issue early usually keeps the repair simpler and less expensive.
Last updated: February 2026
