Frigidaire PRSC2222AF3 side-by-side refrigerator Parts

Yes. For your Frigidaire PRSC2222AF3 side-by-side refrigerator, you can look up replacement parts by entering the full model number (PRSC2222AF3) to pull up the correct parts list and diagrams, then match the part name and ID to what’s installed on your refrigerator.

Most Frigidaire side-by-side model/serial tags are inside the fresh food compartment (often on a side wall), or sometimes behind a crisper drawer.

• Open the refrigerator door and check the inner side walls
• Look near the crisper area or ceiling light housing
• Write the model number exactly as shown (letters and numbers)
• Use the full model number, not a partial family name
• If the tag is hard to read, take a clear photo and zoom in

Once you’re on the PRSC2222AF3 parts list, confirm the part by description and location in the diagram, then compare it to the original part.

• Match the part’s name and where it sits in the diagram
• Compare connectors, mounting points, and shape to the original
• If multiple similar parts appear (common with sensors), match by function and placement
• For water and ice issues, confirm the exact filter or ice maker used on your unit

Using the full model number helps ensure the part fits your exact Frigidaire configuration (wiring, mounting, and revisions). That reduces returns and prevents repeat problems like warm temperatures, dispenser issues, or ice maker failures.

For extra help identifying symptoms before ordering, use our Frigidaire refrigerator error codes reference.

Last updated: February 2026

For a Frigidaire PRSC2222AF3 side-by-side refrigerator, most common repairs typically total $200 to $450 (parts plus labor). Bigger jobs involving the cooling system or compressor often run $600 to $1,200+, mainly because labor time and sealed-system work drive the price.

These are the most common price bands we see for side-by-side refrigerator repairs:

• Service call/diagnostic fee: $75 to $150
• Ice maker or dispenser issues: $200 to $500
• Fan or airflow problems: $250 to $600
• Sensor/control issues: $200 to $550
• Sealed system/compressor-related repairs: $600 to $1,200+

If you already know what failed, pricing gets clearer. These are common PRSC2222AF3-RELATED parts that can change the final bill:

• Frigidaire refrigerator ice maker assembly 243297613 (ice production problems)
• Frigidaire refrigerator evaporator fan motor 809069206 (poor airflow, warm temperatures)
• Refrigerator temperature sensor 5303918775 (temperature regulation issues)
• Frigidaire refrigerator water filter FPPWFU01 (water taste, flow, and ice quality)

Repair cost is mostly labor time, access difficulty, and whether the fix involves the sealed cooling system.

• Hard-to-access components usually increase labor
• Multiple symptoms can mean more diagnosis time
• Ice and water issues may involve more than one part (filter, valve, dispenser, ice maker)
• Airflow issues can be fan-related or frost/defrost-related
• Sealed system work is the biggest cost category

A side-by-side refrigerator like the PRSC2222AF3 can often be restored with a targeted part replacement (ice maker, fan motor, sensor). Getting the right diagnosis first helps avoid replacing good parts and keeps the total repair cost closer to the lower end.

For prevention tips that reduce repeat service calls, we recommend how to prevent water dispenser and ice maker problems.

Last updated: February 2026

The most common problem we see with Frigidaire refrigerators (including model PRSC2222AF3) is a cooling complaint: the fresh food section gets warm, temperatures swing, or frost builds up because airflow or heat removal is compromised. Ice maker and water dispensing issues are another frequent category.

• Fridge warm, freezer OK: restricted airflow, evaporator fan issue, or a sensor/thermistor problem
• Both sections warm: dirty condenser area, condenser fan issue, or sealed-system/compressor control problem
• Heavy frost on freezer back wall: defrost system or airflow problem
• No ice or slow ice production: water supply restriction, clogged filter, or ice maker fault
• Water tastes bad or flow is weak: overdue water filter change

1. Confirm vents inside both compartments are not blocked by food packages.
2. Set temperatures to typical targets: 37°F fresh food and 0°F freezer.
3. Clean dust from the condenser area (unplug first).
4. Listen for the evaporator fan in the freezer; it should run when cooling is needed.
5. If ice or water is slow, replace the filter and purge air from the dispenser.

Cooling and ice maker problems often start small (dust buildup, a weakening fan motor, a restricted filter) but can lead to food spoilage, excessive frost, and longer compressor run times. Catching the root cause early usually prevents repeat failures.

For display codes or beeping related to cooling, use our Frigidaire refrigerator error codes guide to match the code to the most likely circuit or component.

Last updated: February 2026