Owner’s manual
Error CodesWhat model is my Samsung electric range?
Your Samsung electric range’s model number is printed on the appliance’s rating label. On most Samsung free standing electric ranges, you can find it by pulling out the bottom storage drawer and looking on the frame behind it; match that label to the model format shown in the DG68-00199A owner's manual.
Where to look for the model number label
Check these common label locations (start with the storage drawer area):
- Pull out the bottom storage drawer; look on the frame behind the drawer opening
- Open the oven door; check the door frame and front frame area
- Check the lower side trim near the front legs
- Look on the back panel near the power cord entry (if accessible)
How to read the label so you get the right parts
A correct model number is the difference between ordering the right bake element, surface element, or control board and getting a mismatch.
- Copy the model number exactly as printed (letters, numbers, and dashes)
- Also write down the revision code (often shown after the model)
- If there is a serial number, record it too (helpful for production variations)
- Take a clear photo of the label before ordering
Quick checklist: model number vs. serial number
| Label item | What it’s used for | Example format |
|---|---|---|
| Model number | Identifies the exact range design for parts and diagrams | DG68-00199A |
| Serial number | Identifies your specific unit and build sequence | Mix of letters and numbers |
Why it matters
Samsung ranges can share similar styling but use different wiring harnesses, oven sensors, or radiant surface units. Using the exact model number helps us match the correct Range parts list first, then expand your search on Sears PartsDirect if needed.
Last updated: February 2026
Do Samsung ovens come with power cords?
Samsung electric ranges like model DG68-00199A typically do not include a power cord; you choose and install the correct cord for your home’s range outlet. Use the wiring and connection instructions in the DG68-00199A owner's manual to match the cord type and terminal connections.
What power cord you usually need
Most U.S. homes use one of these two range cords:
- 4-prong cord (recommended for newer installations): hot, hot, neutral, ground
- 3-prong cord (common in older installations): hot, hot, neutral (grounding through neutral)
- Use a range-rated cord (not a dryer cord)
- Match the cord to your outlet type and your range terminal block
Quick decision guide (outlet to cord)
| What you have at the wall | What you buy | What changes on the range |
|---|---|---|
| 4-slot range receptacle | 4-prong range cord | Separate neutral and ground connections |
| 3-slot range receptacle | 3-prong range cord | Neutral and ground are bonded per instructions |
Installation tips that prevent common problems
A loose or miswired cord can cause the range to not power on, trip a breaker, or behave erratically.
- Turn off the breaker before touching the terminal block
- Use a strain relief so the cord cannot pull on the connections
- Tighten terminal nuts firmly; recheck after positioning the range
- Confirm the range is plugged into a live, properly grounded outlet (a common “won’t turn on” cause)
- If you need to test power or continuity, use the steps in How to use a multimeter to test electrical parts video
Why it matters
The correct power cord and correct neutral/ground setup protects the control board, heating elements, and wiring harness from damage and helps your Samsung free standing electric range heat and operate safely.
For replacement parts and model lookups, start with the parts list for DG68-00199A, or search by model on Sears PartsDirect.
Last updated: February 2026
What type of plug does a Samsung electric range use?
A Samsung free standing electric range like model DG68-00199A typically uses a 3-prong (3-wire) or 4-prong (4-wire) range power cord and plugs into a matching 208/240V, 60 Hz outlet. The cord is usually not included, so you choose the cord that matches your home’s receptacle; see the DG68-00199A owner's manual for the approved connection method.
Which plug you need (3-prong vs 4-prong)
In most homes, the correct plug is determined by the outlet already installed behind the range.
- 4-prong (4-wire) is the modern standard for new installations.
- 3-prong (3-wire) is common in older homes.
- The plug must match the outlet; do not use adapters.
- Use a range-rated cord (heavy-gauge, correct amperage rating for ranges).
- If the outlet or wiring looks damaged, have it corrected before installing the range.
Quick comparison
| Outlet/cord type | What it looks like | Typical use case | What changes at the range terminal block |
|---|---|---|---|
| 4-prong (4-wire) | 4 slots/prongs | Newer installs | Neutral and ground are separated |
| 3-prong (3-wire) | 3 slots/prongs | Older installs | Neutral and ground are bonded per instructions |
Safe setup checklist
- Turn power off at the breaker before connecting the cord.
- Confirm the circuit is 208/240V, 60 Hz and properly sized for an electric range.
- Verify the cord strain relief is installed so the cord cannot pull on the terminal block.
- After installation, test surface elements and bake/broil for normal operation.
Why it matters
Using the correct 3-wire or 4-wire connection helps the range heat properly and reduces the risk of nuisance tripping, overheating at the terminal block, or unsafe grounding.
You can look up DG68-00199A parts by category from the parts list for this model, or search by model number on Sears PartsDirect.
Last updated: February 2026
Does Samsung make electric ranges?
Yes. Samsung makes electric ranges, including freestanding electric range models like DG68-00199A. Samsung electric ranges commonly include features such as convection-style heat circulation and steam-assisted light cleaning; confirm the exact features and operating details in the DG68-00199A owner's manual.
What “electric range” means for this model
An electric range uses electric heating elements for the cooktop and oven. On many Samsung electric ranges, you may see:
- Radiant cooktop elements (smooth-top style)
- An electric bake element and broil element
- Convection-style air movement for more even baking (model dependent)
- An oven light with a replaceable bulb
How to confirm what your DG68-00199A includes
We recommend using the model-specific documentation and the model number tag on the appliance.
- Match the model number on the rating label to DG68-00199A
- Review the feature and operation sections in the manual
- Use the troubleshooting table if the control beeps or shows an error code
- Use the maintenance section for tasks like replacing the oven light bulb
| What you want to verify | Where to check | Why it matters |
|---|---|---|
| Cooking modes and convection features | DG68-00199A owner's manual | Helps you choose the right bake/roast settings |
| Cleaning options (steam or self-clean) | DG68-00199A owner's manual | Prevents damage from using the wrong cleaning method |
| Error codes and beeping | DG68-00199A owner's manual | Speeds up diagnosis before replacing parts |
Why it matters
Electric ranges require the correct power supply and correct settings to heat evenly. Knowing which features your Samsung range supports (and how they’re intended to be used) helps prevent uneven cooking, nuisance error codes, and avoidable part replacements.
Parts help
If you’re shopping for replacement parts for your Samsung DG68-00199A electric range, start with the parts list for this model; you can also search by model number on Sears PartsDirect to find additional diagrams and compatible items.
Last updated: February 2026
How much is a control board for a Samsung oven?
For a Samsung oven like model DG68-00199A, a replacement control board typically costs about $150 to $300, with the exact price depending on the specific board version and whether you need the main oven control (clock/timer) or a separate interface board. Use the DG68-00199A owner's manual to confirm the control type and features on your range.
What affects the price?
Control board pricing varies most based on what the board controls and how the range is configured.
- Which board you need: main oven control board vs. display/interface board
- Convection and extra features: models with convection fans and added heating elements often use more complex controls
- Wiring harness condition: damaged connectors can mimic a bad board and add repair cost
- Return policy and core requirements: some electronic parts have special return rules
- Labor: professional installation can cost as much as the part, depending on access and diagnosis time
Quick ID checklist before you buy
Use this checklist to avoid ordering the wrong electronic control.
- Confirm the model number DG68-00199A from the appliance ID label
- Note symptoms: dead display, buttons not responding, oven not heating, error codes
- Check for obvious issues: loose ribbon cable, burnt connector, pinched wire
- Reset power: turn the breaker OFF for 2 to 5 minutes, then back ON
- If you test electrical parts, follow safe meter practices (power off when checking continuity)
Typical cost breakdown
| Item | Typical range | Notes |
|---|---|---|
| Control board part | $150 to $300 | Most common range for Samsung oven controls |
| Service labor (if hired) | $150 to $350 | Varies by region and diagnosis time |
| Extra materials | $0 to $50 | Terminals, wire repair, mounting hardware |
Why it matters
A failing control board can cause uneven baking, no-heat conditions, or a nonresponsive keypad. Since DG68-00199A ranges can include convection and steam-clean features, correct diagnosis helps you avoid replacing an expensive board when the real issue is a wiring connection or sensor.
Ordering the right part
We recommend starting with the parts list for your DG68-00199A range; if you are shopping across models or double-checking compatibility, search by model number on Sears PartsDirect.
Last updated: February 2026
