Craftsman 113197250 radial arm saw Parts

Yes. A used radial arm saw can be worth money, but value depends mostly on brand reputation, completeness (especially the guard and anti-kickback parts), and how well it’s been maintained and tuned. For a Craftsman 113197250, local demand and condition typically drive the price more than age alone.

• Safety equipment included: a complete blade guard, riving knife, and anti-kickback pawls raise value.
• Mechanical condition: smooth carriage travel, tight arm locks, and minimal play in the yoke and column matter.
• Table and fence condition: intact table sections and a straight fence help resale.
• Motor and switch function: reliable start/stop and no overheating smells.
• Accessories and documentation: original hardware and the owner's manual help prove completeness.

These are common U.S. secondhand ranges for older 10-inch radial arm saws in working order.

• Verify the on-off switch works correctly and the key is used as intended.
• Confirm the miter and bevel locks hold firmly at common angles.
• Inspect the guard system for key components like the riving knife and anti-kickback pawls.
• Check for excessive blade wobble (bearing/arbor issues) and carriage slop.
• Look for cracked castings, bent arm, or damaged wiring.

Radial arm saws are valued for accurate crosscuts and dado work, but buyers pay more when the saw is complete and set up to reduce kickback and wrong-way feed risks. A well-maintained Craftsman 113197250 is easier to sell and safer to use.

Last updated: February 2026

There is no single “best” brand for every shop; the best radial arm saw is the one that is accurate, safe, and supported with the right guards and adjustments for how you cut. For the Craftsman 113197250 radial arm saw, we focus on keeping the saw properly guarded and set up using the owner's manual.

A radial arm saw is only as good as its alignment, guarding, and condition. When comparing Craftsman, DeWalt, Delta/Rockwell, and other legacy saws, we recommend prioritizing:

• Complete blade guarding (upper and lower guard present, anti-kickback parts installed if equipped)
• Solid arm and carriage travel (smooth movement, minimal play)
• Fence and table condition (flat, secure, not heavily chewed up)
• Repeatable alignment (crosscut squareness and bevel settings hold)
• Parts availability and documentation (manuals, diagrams, and common hardware)

Craftsman radial arm saws like model 113197250 are widely used and can be excellent performers when tuned and used within safe operating practices. The manual content for this model family emphasizes major ripping hazards such as outfeed zone hazard, kickback, and wrong-way feed, so brand choice should never outweigh safe setup and technique.

Radial arm saws can crosscut and (with the right setup) rip, but ripping is where many serious incidents happen. Choosing a brand with a complete guard system and then keeping your saw aligned, guarded, and used correctly is what most improves real-world results.

Last updated: February 2026

Craftsman did not publish a single, universal “stop date” for radial arm saws across all models. For Craftsman model 113197250, the most reliable way to place your saw in time is to use the model and serial information and compare it to the documentation in the owner's manual.

The owner's manual we have for 113197250 is for a 10-inch radial saw guard kit (catalog 9-29012 and 9-29013) and lists 113.197250 among the compatible models. That tells us this saw family was supported with guard and repair parts information, but it does not state a production end year.

• Identify compatible guard kit components for the 113-series saw family
• Use the parts list to match hardware and guard pieces by description
• Follow safety and setup steps for guarding and operation
• Reference diagrams when inspecting missing or damaged guard parts

Use these practical identifiers to narrow down when your saw was made or sold.

• Check the model and serial tag location (often on the arm, column, or base)
• Record the serial number and any date code printed on the tag
• Note the motor plate information (HP, amps, voltage, RPM)
• Compare your guard and table style to the diagrams in the owner's manual

Knowing the approximate era helps you match the correct guard components, table parts, and electrical items; it also sets expectations for alignment and maintenance on a vintage radial arm saw.

Last updated: February 2026