Kenmore 1064650042714 side-by-side refrigerator Parts

For Kenmore model 1064650042714, the most reliable way to get cubic feet is to look up the capacity specification in the owner's manual. If you need a quick estimate, we recommend calculating interior volume by measuring usable inside dimensions and converting cubic inches to cubic feet.

• Check the specifications section in the owner's manual for your exact model.
• Measure the interior (refrigerator and freezer compartments) and calculate volume.
• Compare by refrigerator type: most Kenmore side-by-side refrigerators are commonly in the 20 to 26 cu. ft. range.
• Do not rely on model-number “digits” for capacity; Kenmore model formats vary by manufacturer series.

1. Empty the compartment enough to measure the usable space.
2. Measure width x height x depth in inches (avoid counting door bins and curved walls).
3. Multiply to get cubic inches.
4. Divide by 1,728 to convert to cubic feet.

Capacity helps you choose correctly sized replacement parts and accessories (like shelves and bins), and it also helps when comparing refrigerators for fit and food storage needs.

If you are checking capacity because you are upgrading filtration or troubleshooting ice and water performance, these model-matched parts are commonly replaced:

• Refrigerator cartridge EDR1RXD1 (water filter)
• Refrigerator ice maker assembly WPW10300022
• Refrigerator ice container WPW10670845

Last updated: February 2026

On Kenmore side-by-side refrigerator model 1064650042714, the model number is printed on the appliance identification label. On most Kenmore side-by-side units, you will find that label inside the fresh food (refrigerator) compartment along the side wall or near the ceiling, and sometimes behind a crisper drawer.

• Open the refrigerator (fresh food) door and scan the left and right interior walls
• Check near the top front of the compartment (by the control housing)
• Look behind the crisper drawers (remove the drawers if needed)
• Check the door frame area (hinge side and latch side)
• If you still do not see it, check the freezer compartment side wall

The label typically includes both a model number and a serial number. The model number for this unit will match 1064650042714 (or a closely related 106.5004* series format shown in the documentation).

We use the model number to match the correct Kenmore parts and diagrams for your exact refrigerator configuration (water filter style, ice maker setup, door parts, and electrical components). Using the wrong model number is a common reason parts do not fit.

Once you confirm the model number, compare it to the parts you are replacing. For example, if you are shopping for a water filter for this model, the listed replacement is the refrigerator cartridge EDR1RXD1.

For more model-specific details and diagrams, use the 1064650042714 owner's manual.

Last updated: February 2026

On Kenmore side-by-side refrigerator model 1064650042714, the reset button most people mean is the water filter status reset on the control panel inside the refrigerator compartment. After replacing the filter, you reset it by pressing Refrigerator Temperature within 3 seconds (per the owner's manual).

Many Kenmore side-by-side refrigerators do not have one single, universal reset button for everything. Most reset questions fall into these categories:

• Water filter status light reset (most common)
• Control reset after power loss (unplugging briefly)
• Ice maker or dispenser issue (often needs troubleshooting, not a button)

Use these steps for model 1064650042714:

1. Replace the water filter.
2. Go to the control panel in the refrigerator compartment.
3. Press Refrigerator Temperature within 3 seconds to reset the filter status.
4. Confirm the filter status light changes from red to off.

If you are replacing the filter itself, the correct replacement listed for this model is the refrigerator cartridge EDR1RXD1.

If the display is acting odd or cooling seems off, a basic reset often helps:

• Unplug the refrigerator (or switch off the breaker).
• Wait 5 minutes.
• Restore power.
• Recheck temperature settings and set them to your normal targets.
• Allow 24 hours for temperatures to fully stabilize.

Resetting the filter status keeps the reminder light accurate, which helps protect water flow to the dispenser and ice maker. A simple power reset can also clear minor electronic hiccups without replacing parts.

Last updated: February 2026