Kenmore Elite 79044113511 electric counter unit Parts

Kenmore Elite cooktop model 79044113511 is a radiant electric cooktop (not an induction unit). If your cooktop seems “locked,” the fix is usually restoring power and making sure the control knobs and wiring are working correctly; use the control and wiring details in the 79044113511 manual.

What “locked” usually means on this model

This cooktop uses knob-style surface element controls, so a “lock” symptom is typically one of these conditions:

• The cooktop has no power (tripped breaker, loose connection)
• A surface element control switch is stuck or failed
• A knob or knob sleeve is not engaging the switch shaft
• A wiring issue is preventing power from reaching the controls
• A hot surface indicator light is on (this is not a lock)

Steps to get it working again

1. Reset power: turn the cooktop breaker OFF for 1 minute, then ON.
2. Verify the knobs: confirm each knob is seated and turns the switch shaft normally.
3. Test one element at a time: try a different burner to see if the problem is isolated.
4. Check for heat output: if the indicator lights work but no heat, suspect a switch, element, or wiring.

Parts commonly involved when controls won’t respond

Symptom	Most likely cause	Example part for this model
One burner won’t heat but others work	Failed element control switch	Cooktop element control switch 318531500
Knob turns loosely or won’t drive the switch	Worn knob or sleeve	Cooktop element control knob (black) 316353554
Intermittent operation across controls	Loose/damaged wiring harness	Harness 5304485486

Why it matters

Treating a “locked” symptom as a power or control issue helps you avoid chasing induction-style touch-panel steps that do not apply to model 79044113511, and it points you to the most likely repair parts first.

Last updated: February 2026

For Kenmore Elite electric cooktop model 79044113511, use the overall and countertop cutout dimensions from the 79044113511 installation guide; those measurements control whether the cooktop fits your countertop opening and cabinet. Measure your existing cutout to confirm compatibility before ordering.

The dimensions that matter for a cooktop install

When customers ask for “dimensions,” we match these specs to the countertop and base cabinet:

• Overall width and overall depth (top glass/trim edge to edge)
• Cutout width and cutout depth (the hole in the countertop)
• Minimum cabinet width requirement
• Minimum clearances to side walls, rear wall, and drawers below
• Countertop thickness range supported by the mounting system

How to get the exact numbers for model 79044113511

The installation guide lists the precise measurements and clearances for this Kenmore Elite counter unit.

• Open the 79044113511 installation guide
• Look for sections labeled “Cutout dimensions,” “Product dimensions,” and “Clearances”
• Compare those values to your current opening and cabinet space

Quick measuring checklist (before you remove anything)

• Measure cutout width and depth from the underside if accessible
• Measure the top opening and note any trim overlap
• Confirm cabinet width and any obstructions (braces, rails, drawers)
• If your setup uses downdraft ventilation, verify space for the blower and ducting

What you measure	Where to measure	Why it matters
Cutout width/depth	Inside edge to inside edge of the opening	Determines fit in the countertop
Overall width/depth	Outside edge of glass/trim	Confirms overlap and appearance
Clearances	To walls and below-counter items	Prevents heat damage and interference

Why it matters

“30-inch” cooktops can require different cutout sizes and clearances. Using the model-specific dimensions prevents a poor fit, countertop damage, and ventilation or wiring conflicts.

Last updated: February 2026

The model number 79044113511 is for a Kenmore Elite electric cooktop (counter unit), not a dryer. If you are trying to identify a Kenmore Elite dryer, use the model tag on the dryer itself and match that number to the correct parts list in the 79044113511 owner's manual.

How to find the correct dryer model number

Check the dryer’s model/serial tag, then use the full model number (letters and numbers) when searching parts.

Common places to look:

• Door opening on the cabinet frame (most common)
• Back panel of the dryer
• Inside the door on the door itself
• Side wall just inside the door opening

Cooktop model vs. dryer model: quick comparison

Item you have	What the model number looks like	What it’s used for
Electric cooktop	790.######## (often shown without the dot as 790########)	Cooktop parts like radiant elements and switches
Dryer	Often starts with 110.######## (Whirlpool-built Kenmore) or other prefixes	Dryer parts like belts, rollers, and heating components

Why it matters

Kenmore model numbers are product-specific. Using a cooktop model number to shop dryer parts can lead to ordering the wrong components and delays in repair.

If you are actually working on the 79044113511 cooktop

These are common parts customers replace on this Kenmore Elite cooktop:

• Cooktop element control switch 318531500 for a burner that will not regulate heat
• Range radiant surface element 8583165300010 for a burner that will not heat
• Cooktop element control knob (black) 316353554 if the knob is cracked or slipping

Last updated: February 2026

For Kenmore Elite model 79044113511, the model number label is typically on the cooktop’s underside (bottom of the unit) or on the outside of the metal chassis near the wiring and junction box area. We use that exact model number to match the correct cooktop parts and wiring.

Most common places to check

Turn power off at the breaker first, then look in these spots:

• Underside of the cooktop: a rating label on the bottom pan or frame
• Near the electrical connection: close to the junction box or conduit entry
• Side of the chassis: on a side rail visible after the cooktop is lifted out
• Installation paperwork: model number is often printed on the first pages

How to access the label safely

Because this is a built-in electric counter unit, you often need to lift the cooktop slightly to see the tag.

• Switch OFF the cooktop circuit breaker (240V)
• Confirm the cooktop is off and cool
• Remove the cooktop from the counter only as described in the 79044113511 installation guide
• Use a flashlight to read the label; take a photo for accuracy

What to write down (and why)

Record the full model number and the full serial number exactly as shown.

Label item	Example	Why it matters
Model number	79044113511	Ensures correct fit for elements, switches, and trim
Serial number	(varies)	Helps match production changes and wiring variations

Why it matters

Kenmore Elite cooktops can have multiple versions that look similar. Using the exact model number helps us match the right radiant surface element, control knob, or a control switch such as the cooktop element control switch 318531500.

Last updated: February 2026